User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- Chapter 3. Web-based Management
- Device Time Setting
- Adjust
- Manual Setting:
- Click this option to set time and date manually.
- Synchronize with NTP:
- Click this option if you want to synchronize the device’s date and time with those of time server called NTP server (Network Time Protocol).
- Time Zone
- Set the time difference from Greenwich Mean Time in the area where the device is installed.
- Timing Address
- Enter the NTP server IP address.
- Appendix A: Ping IP Address
- Appendix B: Bandwidth and Video Size Estimation
- Appendix C: DDNS Application
- Appendix D: Configuring Port Forwarding Manually
- Appendix E: Power Line Frequency
- Appendix F: Troubleshooting & Frequently Asked Questions
1080p IR Bullet PoE IP Camera
ICA-4460V
- 15 -
To prevent damaging the device, please adjust the adjuster gently.
2.1.2 I/O Control Instruction
Description of I/O cabling:
Interface Description
DC 12V Power Input
The input power is 12V DC, 1A.
(The power adapter is not included in the package.)
LAN 10/100Mbps (PoE)
Connecting to PC or Hub/PoE Switch
Connects the onboard LAN port to your local area network
by Ethernet cable. For connection to 10BASE-T Ethernet or
100BASE-TX or Fast Ethernet cabling, this Ethernet port
built auto-negotiation protocol can detect or negotiate the
transmission speed of the network automatically. Please
use Cat5e cable to connect the Network Camera to a
100Mbps Fast Ethernet network switch or hub.
ONLY use one power source, either from DC or
from 802.3af Power over Ethernet.
RCA Audio Input
Connect an external active microphone to the camera.
RCA Audio Output
Connect an active loud speaker to the camera.
LAN 10/100Mbps (PoE)
DC 12V Power Input
RCA Audio Input
RCA Audio Output