User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- Chapter 3. Web-based Management
- Device Time Setting
- Adjust
- Manual Setting:
- Click this option to set time and date manually.
- Synchronize with NTP:
- Click this option if you want to synchronize the device’s date and time with those of time server called NTP server (Network Time Protocol).
- Time Zone
- Set the time difference from Greenwich Mean Time in the area where the device is installed.
- Timing Address
- Enter the NTP server IP address.
- Appendix A: Ping IP Address
- Appendix B: Bandwidth and Video Size Estimation
- Appendix C: DDNS Application
- Appendix D: Configuring Port Forwarding Manually
- Appendix E: Power Line Frequency
- Appendix F: Troubleshooting & Frequently Asked Questions
1080p IR Bullet PoE IP Camera
ICA-4460V
- 14 -
Chapter 2. Hardware Interface
2.1 Physical Descriptions
2.1.1 ICA-3460V Physical Details
Item Description
Lens
Keep the lens clean for excellent video quality.
IR LED
Emits infrared light to provide light source in dark places.
Light Sensor
Detects the illumination level or the place where this IP camera is
installed, and switches IR LEDs on when it’s required.
When IR LEDs are switched on, this IP camera will switch
to black and white video mode to enhance video quality. Do
not cover light sensor or else this IP camera will work in
black and white mode only.
Zoom
Adjust the Zoom adjuster to zoom in/out by the small screwdriver in the
packet.
Focus
Adjust the Focus adjuster to get clear image by the small screwdriver in
the packet.