User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- Chapter 3. Web-based Management
- Device Time Setting
- Adjust
- Manual Setting:
- Click this option to set time and date manually.
- Synchronize with NTP:
- Click this option if you want to synchronize the device’s date and time with those of time server called NTP server (Network Time Protocol).
- Time Zone
- Set the time difference from Greenwich Mean Time in the area where the device is installed.
- Timing Address
- Enter the NTP server IP address.
- Appendix A: Ping IP Address
- Appendix B: Bandwidth and Video Size Estimation
- Appendix C: DDNS Application
- Appendix D: Configuring Port Forwarding Manually
- Appendix E: Power Line Frequency
- Appendix F: Troubleshooting & Frequently Asked Questions
1080p IR Bullet PoE IP Camera
ICA-4460V
- 13 -
Programming
Interface
ONVIF compliant
Alarm Triggering
Motion detection
Alarm Events
Event snapshot upload via FTP
Notification via email, and HTTP
General
Power
Requirements
12V DC, 1A
IEEE 802.3af/at Class 3
Power
Consumption
9W (IR on)
Weight
640g
Dimensions (Φ x L)
139.5 x 97 mm
Emission
CE, FCC
Housing
IP66-rated
Connectors
10/100Mbps Ethernet, waterproof RJ45 connector
DC power jack
RCA audio in (white) and RCA audio out (red)
Environments
Cold Boot
Temperature
-10 ~ 50 degrees C
Operating
Temperature
-15 ~ 55 degrees C
Operating Humidity
10 ~ 90% (non-condensing)