User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- Chapter 3. Web-based Management
- Device Time Setting
- Adjust
- Manual Setting:
- Click this option to set time and date manually.
- Synchronize with NTP:
- Click this option if you want to synchronize the device’s date and time with those of time server called NTP server (Network Time Protocol).
- Time Zone
- Set the time difference from Greenwich Mean Time in the area where the device is installed.
- Timing Address
- Enter the NTP server IP address.
- Appendix A: Ping IP Address
- Appendix B: Bandwidth and Video Size Estimation
- Appendix C: DDNS Application
- Appendix D: Configuring Port Forwarding Manually
- Appendix E: Power Line Frequency
- Appendix F: Troubleshooting & Frequently Asked Questions
1080p IR Bullet PoE IP Camera
ICA-4460V
- 11 -
1.3 Features
Camera
1/3" progressive scan CMOS sensor
2.8~12 mm vari-focal, fixed-iris lens
0.01 lux minimum illumination at F1.2
Maximum resolution 2592 x 1520
36 built-in powerful IR illuminators, effective up to 20~40 meters
Removable IR-cut filter for Day & Night function
Video and Audio
Simultaneous H.264 and H.265 video compression
Simultaneous multi-stream support
Max. resolution of 4 mega-pixel (2592 x 1520 pixel)
DNR to improve picture quality at low lux
WDR enhancement function strengthens visibility under extremely bright or dark
environments
Two-way audio support with enhanced audio quality
Network and Configuration
Compliant with IEEE 802.3af/at PoE interface for flexible deployment
RTSP, FTP, and PLANET DDNS protocols selectable
Easy Installation and Management
ONVIF compliant for interoperability
IP66-rated housing and waterproof RJ45 connector for rigorous environment
Intelligent motion detection alarm
Easy configuration and management via Windows-based utility or web interface