080p IR Bullet PoE IP Camera ICA-4460V H.
1080p IR Bullet PoE IP Camera ICA-4460V Copyright Copyright 2019 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of PLANET.
1080p IR Bullet PoE IP Camera ICA-4460V party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
1080p IR Bullet PoE IP Camera ICA-4460V Table of Contents Chapter 1. Product Introduction .............................................................................................6 1.1 Package Contents ......................................................................................................6 1.2 Overview ....................................................................................................................6 1.3 Features ..................................................
1080p IR Bullet PoE IP Camera ICA-4460V 3.6 Cloud Setting ........................................................................................................... 46 3.7 Advanced Tool ......................................................................................................... 47 3.8 3.9 3.7.1 Time Setting .......................................................................................... 47 3.7.2 Motion Detection ...............................................................
1080p IR Bullet PoE IP Camera ICA-4460V Chapter 1. Product Introduction 1.1 Package Contents The package should contain the following: IP Camera Unit x 1 Camera Screw Package x 1 Cable Gland x 1 Quick Installation Guide x 1 If any of the above items are missing, please contact your dealer immediately. 1.2 Overview Compact and Cost-effective 4MP Outdoor Surveillance PLANET ICA-4460V PoE IP Camera delivers excellent picture quality in H.
1080p IR Bullet PoE IP Camera ICA-4460V High Efficiency Video Compression The ICA-4460V employs the H.265 technology to enable the camera to provide higher and more efficient image compression rates. If the same image quality level of H.264 is compared with that of H.265, the latter is able to save around 50% of bandwidth, meaning H.265 offers much higher quality video for less bandwidth. Thus, it can further enhance the overall performance of its IP surveillance system.
1080p IR Bullet PoE IP Camera ICA-4460V extremely clear and exquisite picture quality can be produced even under any challenging lighting conditions. Water Resistance and Dust-proof Protection The IP66-rated housing protects the camera body against rain and dust, and ensures operation under extreme weather conditions, which makes it an ideal solution for outdoor applications, such as buildings, roads, parking areas, garages, railway stations and airports.
1080p IR Bullet PoE IP Camera ICA-4460V Advanced Media Management The ICA-4460V supports a number of advanced features to enhance surveillance flexibility and event management capabilities. The advanced features include 4 configurable regions of privacy mask to protect personal privacy, and external RCA ports that allow accessories, such as speakers and microphones, to be added to the camera for two-way audio function.
80p IR Bullet PoE IP Camera ICA-4460V Flexible Installation and Power Functionality The ICA-4460V incorporates IEEE 802.3af/at Power over Ethernet standard and able to be powered via the network cable from a PoE power sourcing equipment such as PoE Switch or PoE injector. It thus eliminates the need for extra power cables and reduces installation costs while increases the deployment flexibility. The ICA-4460V is ONVIF compliant and thus, it is interoperable with other brands in the market.
1080p IR Bullet PoE IP Camera ICA-4460V 1.3 Features Camera 1/3" progressive scan CMOS sensor 2.8~12 mm vari-focal, fixed-iris lens 0.01 lux minimum illumination at F1.2 Maximum resolution 2592 x 1520 36 built-in powerful IR illuminators, effective up to 20~40 meters Removable IR-cut filter for Day & Night function Video and Audio Simultaneous H.264 and H.265 video compression Simultaneous multi-stream support Max.
1080p IR Bullet PoE IP Camera ICA-4460V 1.4 Product Specifications Model ICA-4460V Camera Image device 1/3" 4 mega-pixel progressive scan CMOS sensor Lens Vari-focal 2.8~12mm, F1.2 Angle of view: Horizontal: 27~90 degrees Vertical: 27~90 degrees Min. Illumination 0.01 lux (color) @ F1.2 0 lux (B/W) @ IR on IR Illuminations IR LED x 36, 850nm Built-in IR illuminators, effective up to 20~40 meters* *The IR distance is based on the environment.
1080p IR Bullet PoE IP Camera ICA-4460V Programming Interface ONVIF compliant Alarm Triggering Motion detection Alarm Events Event snapshot upload via FTP Notification via email, and HTTP General Power Requirements 12V DC, 1A IEEE 802.3af/at Class 3 Power Consumption 9W (IR on) Weight 640g Dimensions (Φ x L) 139.
1080p IR Bullet PoE IP Camera ICA-4460V Chapter 2. Hardware Interface 2.1 Physical Descriptions 2.1.1 ICA-3460V Physical Details Item Lens IR LED Description Keep the lens clean for excellent video quality. Emits infrared light to provide light source in dark places. Detects the illumination level or the place where this IP camera is installed, and switches IR LEDs on when it’s required.
1080p IR Bullet PoE IP Camera ICA-4460V To prevent damaging the device, please adjust the adjuster gently. 2.1.2 I/O Control Instruction LAN 10/100Mbps (PoE) RCA Audio Output RCA Audio Input DC 12V Power Input Description of I/O cabling: Interface DC 12V Power Input Description The input power is 12V DC, 1A. (The power adapter is not included in the package.) Connecting to PC or Hub/PoE Switch Connects the onboard LAN port to your local area network by Ethernet cable.
1080p IR Bullet PoE IP Camera ICA-4460V 2.2 Hardware Installation 1. Place the Camera on the ceiling or fix it onto wall Use three screws to fix the camera onto the ceiling or wall. 2. Plug an Ethernet cable into the camera Connect the Ethernet cable (not included in the package) to the LAN socket. It is recommended to use an exterior-grade Ethernet cable that is already waterproof.
1080p IR Bullet PoE IP Camera ICA-4460V 2.3 Initial Utility Installation This chapter shows how to quickly set up your IP camera. The camera is with the default settings. However to help you find the networked camera quickly, the windows utility PLANET IP Finder II can search the cameras in the network that can help you to configure some basic settings before you start advanced management and monitoring. 2.3.1 Installing PLANET IP Finder II 1.
1080p IR Bullet PoE IP Camera ICA-4460V 3. Please click “Next” to install with original settings, or you may click the “Browse…” button to modify the install folder and then press “Next” to continue. 4. Please click “Install” to start the installation.
1080p IR Bullet PoE IP Camera ICA-4460V 5. Please click “Finish” to complete the installation and launch program immediately. 6. The search tool will run as shown in the picture below.
1080p IR Bullet PoE IP Camera ICA-4460V 2.3.2 Search Function IP Finder II will search all IP cameras connected to LAN. The user can click “Search” to search again. A quick way to access IP camera is to left-click the mouse twice on a selected IP camera listed on “Device list” of PLANET IP Finder II. A login window of IE browser will be opened. 2.3.3 Network Function If user wants to set a specific IP address of device, please refer to the following steps to set. Step 1.
1080p IR Bullet PoE IP Camera ICA-4460V If user wants to set device as DHCP client, please refer to the following steps to set. Step 1. Select an IP cam from the device list. Step 2. Check the “Enable DHCP” box. Step 3. Click “Generation”. Step 4. Click “Modify” when you see the message and please click “Yes” to change the IP address.
1080p IR Bullet PoE IP Camera ICA-4460V Please make sure the IP address of PC is in the same subnet as device’s IP address. 2.3.4 Remote Update Function Device Update: User can update firmware with the function. Please select a device and click “Select File” to select the correct firmware, and then click ”Start Update” to start to update the firmware. 1. Please make sure the firmware is correct. If the firmware is wrong, the device might be damaged. 2.
1080p IR Bullet PoE IP Camera ICA-4460V click “Synchro Time” to change time. Reboot Device: Re-start the device. Please select a device and click “Reboot Device” to reboot device.
1080p IR Bullet PoE IP Camera ICA-4460V 2.4 ActiveX Setup to Use the IP Camera The IP Camera web pages communicate with the IP camera using an ActiveX control. The ActiveX control must be downloaded from the IP camera and installed on your PC. Your Internet Explorer security settings must allow for the web page to work correctly. To use the IP camera, user must set up his IE browser as follows: 2.4.
1080p IR Bullet PoE IP Camera ICA-4460V By now, you have finished your entire PC configuration for the camera. 2.4.2 Internet Explorer 7 for Windows XP From your IE browser ”Tools” ”Internet Options…” ”Security” ”Custom Level…”, please set up your “Settings” as follows: Set the first 3 items: • Allow previously unused ActiveX control to run… • Allows Scriptlets • Automatic prompting for ActiveX controls By now, you have finished your entire PC configuration for the camera. 2.4.
1080p IR Bullet PoE IP Camera ICA-4460V • Enable “Automatic prompting for ActiveX controls” • Prompt “Initialize and script active controls not marked….” From your IE browser ”Tools” ”Internet Options…” ”Security” ”Trusted Sites” ”Sites”, please add the camera’s IP address as follows: •Add the device’s IP, then click the Close button. By now, you have finished your entire PC configuration for the camera. 2.4.
1080p IR Bullet PoE IP Camera ICA-4460V Please add the camera’s IP address as follows: •Add the device’s IP, then click the Close button.
1080p IR Bullet PoE IP Camera ICA-4460V From your IE browser ”Tool” ”Internet Options…” ”Security” ”Trusted Sites” ”Custom Level…”, please set up your “Settings” as follows: - 28 -
1080p IR Bullet PoE IP Camera ICA-4460V • Disable “Allow ActiveX Filtering” •Prompt “Allow Scriptlets” • Enable “Automatic prompting for ActiveX controls” - 29 -
1080p IR Bullet PoE IP Camera ICA-4460V • Prompt “Download unsigned ActiveX controls” - 30 -
1080p IR Bullet PoE IP Camera ICA-4460V By now, you have finished your entire PC configuration for the camera.
1080p IR Bullet PoE IP Camera ICA-4460V Chapter 3. Web-based Management This chapter provides setup details of the IP camera’s Web-based Interface. 3.1 Introduction The IP camera can be configured with your Web browser. Before configuring, please make sure your PC is under the same IP segment with Internet camera. 3.2 Connecting to Internet Camera A. Use the following procedure to establish a connection from your PC to the camera. B.
1080p IR Bullet PoE IP Camera ICA-4460V Please install the player “ie.exe” If you can’t install the ActiveX, please refer the chapter 2.4 ActiveX Setup to Use the IP Camera to configure your IE browser setting. The login window of Internet camera will appear. Default login username and password are both admin.
1080p IR Bullet PoE IP Camera ICA-4460V When you see this message, click Run to install the required ActiveX control After the ActiveX control has been installed and run, the first image will be displayed. You should be able to see the images captured from the Internet camera on the web page now. For advanced functions, please refer to instructions given in the following chapters. If you log in the camera as an ordinary user, setting function will be not available.
1080p IR Bullet PoE IP Camera ICA-4460V Streaming type Set up the real-time view stream type (Mainstream/Substream). Fluent or Real-time Select the video quality: fluent video or real time video. Turn ON or OFF audio out function. User has to connect an external active speaker. Enable audio in function. User has to connect an external active microphone. Click this button to display the image in full-screen mode (uses every available space to display the image captured by this camera).
1080p IR Bullet PoE IP Camera ICA-4460V Video Format Video codec of the selected profile. Main stream 2592x1520, 2304x1296, 1920x1080, 1280x1024, 1280x960, Resolution 1280x720, 704x576, 640x480 Sub stream 704x576, 640x480, 352x288, 320x240, 176x144 Defines the targeted frame rate of this profile. For example, set Frame Rate the frame rate to 30 fps, then the image will be updated for 30 frames per second. User can set the desired maximum frame rate versus video quality under the limited bandwidth.
1080p IR Bullet PoE IP Camera ICA-4460V The max. value is affected by the input resolution you choose. Frame Rate Interval 3.4.2 Audio Setting Audio Enable Audio Format Audio Sampling Rate Audio Input Volume Audio Output Volume Check the box to set audio function as enable; uncheck it to set audio function as disable. User can set audio format as G.711 (A-law and µ-law) User can set audio sampling rate as 8000/16000. User can set audio input volume from 1 to 100.
1080p IR Bullet PoE IP Camera ICA-4460V 3.4.3 Camera Setting Brightness Contrast Saturation Large value will brighten camera. Large value will contrast camera heavily. Large value will color camera heavily. There are three modes selectable-- Auto/Day/Night. In the Auto Day/Night Mode mode, the camera will change the image quality automatically, based on the light condition. Power Frequency Frequency of power line: 50 or 60Hz. Mirror Turn the “Mirror” On or OFF.
1080p IR Bullet PoE IP Camera ICA-4460V 3.4.4 OSD & Mask Settings OSD Settings Display region of Device Title & Time can be settable. Click “Video Mask Settings” to enter the main interface shown below: Select one region on the image; click “Set” to save this setup. Video Mask Settings Click “Query” to check the selected masking region. Click “Delete All” to delete all Masking regions. Or select one region, and click “Delete Selected”. 3.
1080p IR Bullet PoE IP Camera ICA-4460V 3.5.1 TCP/IP Setting This section provides the menu of connecting the device through Ethernet cable. Enable this checked box when a DHCP server is installed on the network to issue IP address assignment. With this setting, the IP Obtain an IP address address is assigned automatically. If this device cannot get an IP automatically address within limited tries, the device will assign a default IP (DHCP) address for 192.168.0.20.
1080p IR Bullet PoE IP Camera ICA-4460V on the network's configuration. In IP networking, traffic takes the form of packets. IP subnets advance network security and performance to some level by organizing hosts into logical groups. Subnet masks contain four bytes and usually appear in the same "dotted decimal" data. For example, a very common subnet mask in its binary demonstration 11111111 11111111 11111111 00000000 will usually be shown in the corresponding, more readable form as 255.255.255.0.
1080p IR Bullet PoE IP Camera ICA-4460V 3.5.2 Port Management User may need to assign a different port to avoid conflict when setting up IP assignment. TCP Port Choose the TCP port. HTTP Port Set up web page connecting port and video transmitting port (Default: 80). Choose the RTSP port. The RTSP protocol allows a connecting client to RTSP Port start a video stream. Enter the RTSP port number to use. The default value is 554.
1080p IR Bullet PoE IP Camera ICA-4460V • Connect to a LAN by DHCP or fixed IP • Access the device by entering Setting Network PPPoE as shown below: PPPoE Dial-up To enable or disable the PPPoE service here. PPPoE Account Type the user name for the PPPoE service which is provided by ISP. PPPoE Password Type the password for the PPPoE service which is provided by ISP. Status Shows the Status of PPPoE connection.
1080p IR Bullet PoE IP Camera ICA-4460V The Internet uses DNS servers to look up domain names and translates them into IP addresses. Domain names are just easy to remember aliases for IP addresses. A dynamic DNS service is unique because it provides a means of updating your IP address so that your listing will remain current when your IP address changes. There are several excellent DDNS services available on the Internet and best of all they’re free to use. One such service you can use is www.planetddns.
1080p IR Bullet PoE IP Camera ICA-4460V 3.5.4 FTP Setting You may set up FTP parameters for further operation of Event Schedule. If users want to send the alarm message to an FTP server, it will need to configure parameters here and also add at least one event schedule to enable event triggering as SMTP. FTP enable To enable or disable the FTP service here. User Name Type the user name for the FTP server. Password Type the password for the FTP server.
1080p IR Bullet PoE IP Camera ICA-4460V SMTP Port E-mail From User Name Password E-mail To Set port number of SMTP service. Type the sender’s E-mail address. This address is used for replying e-mails. Type the user name for the SMTP server if authentication is enabled. Type the password for the SMTP server if authentication is enabled. Type the receiver’s e-mail address. 3.6 Cloud Setting Refer to this menu to connect the camera to cloud server, so user is able to access the camera via mobile app.
1080p IR Bullet PoE IP Camera ICA-4460V When the camera is connected to cloud server, the status will show “OnLine”. Status When the camera is disconnected from cloud server, the status will show “OffLine”. User can use mobile app to watch video only when the status is “OnLine”. If the status is “OffLine”, please check the following: Please set the camera’s TCP/IP setting to make it connect to internet. Is there a firewall or DMZ server in your network? If yes, please set it as disable.
1080p IR Bullet PoE IP Camera ICA-4460V Setting Click this option to enable time synchronization with PC time. Manual Setting: Click this option to set time and date manually. Manual Setting: Adjust Synchronize with NTP: Time Zone Timing Address Click this option to set time and date manually. Click this option if you want to synchronize the device’s date and time with those of time server called NTP server (Network Time Protocol).
1080p IR Bullet PoE IP Camera ICA-4460V Alarm Enable Sensitivity To enable or disable the Alarm service here. Define the sensitivity value of motion detection. The higher the value is, the more sensitivity it will be. For example, if you select "10 sec" here, once the motion is Alarm Duration (S) detected and action is triggered, it cannot be triggered again within 10 seconds. Click “ Motion detection area” to select the motion area Select one region on the image, click “Set” to save this setup.
1080p IR Bullet PoE IP Camera ICA-4460V 3.7.3 User Management Refer to this menu to set the user names and password of the Administrator and access right of each user. Add User Manage the user’s account of viewer user. Modify Modify this password of user. Delete Remove the user account. 3.8 SysInfo Management Refer to this menu to perform the principal settings of the Camera. 3.8.1 System Update To update the firmware online, click “Select file” to select the firmware.
1080p IR Bullet PoE IP Camera ICA-4460V 1. Make sure that the firmware only applies to this device; once updated, it will be burned into FLASH ROM of system. 2. The firmware upgrade procedure cannot be interrupted. If the power and/or network connection are/is broken during the download procedure, it might possibly cause serious damage to the device. Please be aware that you should not turn off the power during updating the firmware and waiting for the “finish” message.
1080p IR Bullet PoE IP Camera ICA-4460V To have a backup of all of the parameters, click this button. If Backup necessary, it will then be possible to return to the previous settings if settings are changed and there is unexpected behavior. 3.8.5 Version Info This information shows the software version in the device. 3.8.6 Log Management User can check the system log, alarm log, operate log information of the device. 3.8.
1080p IR Bullet PoE IP Camera ICA-4460V Click Browse to enable you to select the save path and file name prefix, and select OK to continue. Snapshot Path If you like to retrieve the saved image, select the file to display the saved image by using any one of the graph editing tools. Select Browse to enable you to select the save path and file name prefix, and select OK to continue. Record Path After recording is stopped, list the files. This file is named as Manualyyyymmddhhmmss.avi. 3.
1080p IR Bullet PoE IP Camera ICA-4460V Appendix A: Ping IP Address The ping (or Packet Internet Groper) command is used to detect whether a specific IP address is accessible by sending a packet to the specific address and waiting for a reply. It’s also a very useful tool to confirm whether Internet camera is installed or not, or if the IP address conflicts with any other device over the network.
1080p IR Bullet PoE IP Camera ICA-4460V Appendix B: Bandwidth and Video Size Estimation The frame rate of video transmitted from the device depends on connection bandwidth between client and server, video resolution, codec type, and quality setting of server. Here is a guideline to help you roughly estimate the bandwidth requirements from your device. The required bandwidth depends on content of video source.
1080p IR Bullet PoE IP Camera ICA-4460V Appendix C: DDNS Application Configuring PLANET DDNS steps: Step 1: Visit DDNS provider’s web site and register an account if you do not have one yet. For example, register an account at http://planetddns.com Step 2: Enable DDNS option through accessing web page of the camera. Step 3: Input all DDNS settings.
1080p IR Bullet PoE IP Camera ICA-4460V Appendix D: Configuring Port Forwarding Manually The device can be used with a router. If the device wants to be accessed from the WAN, its IP address needs to be set up as fixed IP address. Port forwarding or Virtual Server function of router also needs to be set up. This device supports UPnP traversal function. Therefore, user could use this feature to configure port forwarding of NAT router first.
1080p IR Bullet PoE IP Camera ICA-4460V Your WAN IP address will be listed here. 3. Open/set Virtual Server Ports to enable remote image viewing The firewall security features built into the router and most routers prevent users from accessing the video from the device over the Internet. The router connects to the Internet over a series of numbered ports. The ports normally used by the device are blocked from access over the Internet. Therefore, these ports need to be made accessible over the Internet.
1080p IR Bullet PoE IP Camera ICA-4460V Enter valid ports in the Virtual Server section of your router. Please make sure to check the box on this line to enable settings. Then the device can be accessed from WAN by the router’s WAN IP address. By now, you have finished your entire PC configuration for this device.
1080p IR Bullet PoE IP Camera ICA-4460V Appendix E: Power Line Frequency COUNTRY VOLTAGE FREQUENCY Argentina 220V 50 Hz COMMENTS *Neutral and line wires are reversed from that used in Australia and elsewhere. *Outlets typically controlled by adjacent switch. Australia 230V* 50 Hz Though nominal voltage has been officially changed to 230V, 240V is within tolerances and commonly found.
1080p IR Bullet PoE IP Camera ICA-4460V COUNTRY VOLTAGE FREQUENCY Taiwan 110V 60 Hz Thailand 220V 50 Hz COMMENTS *Outlets typically controlled by adjacent switch. United Kingdom 230V* 50 Hz Though nominal voltage has been officially changed to 230V, 240V is within tolerances and commonly found.
1080p IR Bullet PoE IP Camera ICA-4460V Appendix F: Troubleshooting & Frequently Asked Questions Features The video and audio codec is The device utilizes H.265/H.264 compression to provide high-quality adopted in the device. images. The device does not have a built-in audio. The maximum number of users is limited to 3. However, it also depends on the total bandwidth accessed to this device from clients. The maximum number of users that accesses the device simultaneously.
1080p IR Bullet PoE IP Camera ICA-4460V 2. Check the box of this device. 3. Press the “Restore Factory” button to restore all settings to factory default setting. Forgot the IP address of the Check IP address of device by using PLANET IP Finder II program device. or set the device to default by reset button. Re-power the device if you cannot find the unit within 1 minute. Do not connect device over a router. PLANET IP Finder II program cannot detect device over a router.
1080p IR Bullet PoE IP Camera ICA-4460V Make sure to enter the IP address of Internet Explorer correctly. If the camera has a dynamic address, it may have changed since you last checked it. Network congestion may prevent the web page from appearing quickly. Wait for a while. The IP address and subnet mask of the PC and Internet camera must be in the same class of the private IP address on the LAN.
1080p IR Bullet PoE IP Camera ICA-4460V Network congestion may prevent the Image screen from appearing quickly. You may choose lower resolution to reduce the required bandwidth. Internet Explorer displays the following message: “Your current Set up the IE security settings or configure the individual settings to security allow downloading and scripting of ActiveX controls. settings prohibit downloading ActiveX controls”. Might be caused from the firewall protection.
1080p IR Bullet PoE IP Camera ICA-4460V correctly. Image Transfer on FTP does not work. Default Gateway and DNS server address should be set up If FTP does not work properly, ask your ISP or network administrator about the transferring mode of FTP server. The RTSP command: What is the RTSP command? rtsp://servername:rtsp port/stander/livestream/0/0 Note. 0=Main stream；1=Sub stream e.g., rtsp://192.168.0.
