User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Physical Descriptions
- Chapter 3. Preparation
- Chapter 4. Web-based Management
- Chapter 5. Quick Connection to a Wireless Network
- Appendix A: DDNS Application
- Appendix B: FAQs
- Appendix C: Troubleshooting
- Appendix D: Glossary
- EC Declaration of Conformity
User Manual of IAP-1800AX & IAP-2400AX
- 79 -
Object
Description
IGMP
Enable the IGMP function.
IGMP Versions
Select the GMP Versions
4.2.8 IPv6
This page is used to configure parameter for IPv6 internet network which connects to WAN port of the
Industrial 802.11ax Wireless AP as shown in Figure 4-36. It allows you to enable IPv6 function and set
up the parameters of the Industrial 802.11ax Wireless AP’s WAN. In this setting you may change WAN
connection type and other settings.