User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Physical Descriptions
- Chapter 3. Preparation
- Chapter 4. Web-based Management
- Chapter 5. Quick Connection to a Wireless Network
- Appendix A: DDNS Application
- Appendix B: FAQs
- Appendix C: Troubleshooting
- Appendix D: Glossary
- EC Declaration of Conformity
User Manual of IAP-1800AX & IAP-2400AX
- 68 -
• Power Alarm
Controls whether faulty PWR1 or faulty PWR2 or both is/are
detected.
• Port Alarm
Controls which port or all is/are detected for fault.
4.1.13 Digital Input / Output
The Industrial 802.11ax Wireless AP supports Digital Input and Digital Output on its upper panel. This
external alarm enables users to use Digital Input to detect and log external device status (such as door
intrusion detector), and send event alarm to the administrators. The Digital Output could be used to
alarm the administrators if the Industrial 802.11ax Wireless AP port shows link down, link up or power
failure.