User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Physical Descriptions
- Chapter 3. Preparation
- Chapter 4. Web-based Management
- Chapter 5. Quick Connection to a Wireless Network
- Appendix A: DDNS Application
- Appendix B: FAQs
- Appendix C: Troubleshooting
- Appendix D: Glossary
- EC Declaration of Conformity
User Manual of IAP-1800AX & IAP-2400AX
- 67 -
4.1.12 Fault Alarm
The Industrial 802.11ax Wireless AP supports a Fault Alarm feature which can alert the users when
there is something wrong with the device. With this ideal feature, the users would not have to waste
time finding where the issue is. It will help to save time and human resource.
This page provides fault alarm setting as shown below.
Figure 4-23: Fault Alarm
Object Description
• Enable
Controls whether Fault Alarm is enabled.
• Record
Controls whether Record is sending System log or SMS.
• Event
Controls whether Port Failure or Power Failure
or both is/are
detected.