User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Physical Descriptions
- Chapter 3. Preparation
- Chapter 4. Web-based Management
- Chapter 5. Quick Connection to a Wireless Network
- Appendix A: DDNS Application
- Appendix B: FAQs
- Appendix C: Troubleshooting
- Appendix D: Glossary
- EC Declaration of Conformity
User Manual of IAP-1800AX & IAP-2400AX
- 65 -
4.1.10 SNMP
This page provides SNMP setting of the Industrial 802.11ax Wireless AP as shown in Figure 4-21.
Figure 4-21: SNMP
Object Description
Enable SNMP
Disable or enable the SNMP function.
The default configuration is enabled.
Read/Write Community
Allows entering characters for SNMP Read/Write Community of the
Industrial 802.11ax Wireless AP.
System Name
Allows entering characters for system name of the Industrial 802.11ax
Wireless AP.
System Location
Allows entering characters for system location of the Industrial
802.11ax Wireless AP.
System Contact
Allows entering characters for system contact of the Industrial
802.11ax Wireless AP.
Apply Settings
Press this button to save and apply changes.
Cancel Changes
Press this button to undo any changes made locally and revert to
previously saved values.