User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Physical Descriptions
- Chapter 3. Preparation
- Chapter 4. Web-based Management
- Chapter 5. Quick Connection to a Wireless Network
- Appendix A: DDNS Application
- Appendix B: FAQs
- Appendix C: Troubleshooting
- Appendix D: Glossary
- EC Declaration of Conformity
User Manual of IAP-1800AX & IAP-2400AX
- 52 -
Step 2: LAN Interface
Set up the IP Address and Subnet Mask for the LAN interface as shown in Figure 4-7.
Figure 4-7: Setup Wizard – LAN Configuration
Object Description
IP Address
Enter the IP address of your Industrial 802.11ax Wireless AP. The
default is 192.168.1.1.
Subnet Mask
An address code that determines the size of the network. Normally
use 255.255.255.0 as the subnet mask.
DHCP Server
By default, the DHCP Server is enabled.
If user needs to disable the function, please uncheck the box.
Start IP Address
By default, the start IP address is 192.168.1.100.
Please do not set it to the same IP address of the Industrial 802.11ax
Wireless AP.
Maximum DHCP Users
By default, the maximum DHCP users are 101, which means the
Industrial 802.11ax Wireless AP will provide DHCP client with IP
address from 192.168.1.100 to 192.168.1.200 when the start IP
address is 192.168.1.100.
Next
Press this button to the next step.
Cancel
Press this button to undo any changes made locally and revert to
previously saved values.