User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Physical Descriptions
- Chapter 3. Preparation
- Chapter 4. Web-based Management
- Chapter 5. Quick Connection to a Wireless Network
- Appendix A: DDNS Application
- Appendix B: FAQs
- Appendix C: Troubleshooting
- Appendix D: Glossary
- EC Declaration of Conformity
User Manual of IAP-1800AX & IAP-2400AX
- 50 -
RADIUS
Enable/Disable RADIUS on Industrial 802.11ax Wireless APs.
Captive Portal
Enable/Disable Captive Portal on Industrial 802.11ax Wireless
APs.
SNMP
Display SNMP system information.
NMS
Enable/Disable NMS on Industrial 802.11ax Wireless APs.
Fault Alarm
One relay output for power failure. Alarm relay current carry
ability.
Digital Input/output
Digital Input/output Control Configuration page.
Remote Syslog
Enable Captive Portal on Industrial 802.11ax Wireless APs.
Event Log
Display Event Log information.
4.1.1 Operation Mode
The Wizard guides you to configuring the Industrial 802.11ax Wireless AP in a different mode, including
AP, gateway and repeater modes.
Figure 4-5: Operation Mode