User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Physical Descriptions
- Chapter 3. Preparation
- Chapter 4. Web-based Management
- Chapter 5. Quick Connection to a Wireless Network
- Appendix A: DDNS Application
- Appendix B: FAQs
- Appendix C: Troubleshooting
- Appendix D: Glossary
- EC Declaration of Conformity
User Manual of IAP-1800AX & IAP-2400AX
- 46 -
3.4 Starting Setup in the Web UI
It is easy to configure and manage the Industrial 802.11ax Wireless AP with the web browser.
Step 1. To access the configuration utility, open a web-browser and enter the default IP address
http://192.168.1.253 in the web address field of the browser.
Figure 3-7: Login by Default IP Address
Step 2. When the login window pops up, please enter username and password. The default
username and password are “admin”. Then click the LOGIN button to continue.
The following web screen is based on the IAP-1800AX; the display of the IAP-2400AX is
the same as that of the IAP-1800AX.
Figure 3-8: Login Window
Default IP Address: 192.168.1.253
Default Password: admin
If the above screen does not pop up, it may mean that your web browser has been set to a
proxy. Go to Tools menu> Internet Options> Connections> LAN Settings o
n the screen that
appears, uncheck Using Proxy and click OK to finish it.