User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Physical Descriptions
- Chapter 3. Preparation
- Chapter 4. Web-based Management
- Chapter 5. Quick Connection to a Wireless Network
- Appendix A: DDNS Application
- Appendix B: FAQs
- Appendix C: Troubleshooting
- Appendix D: Glossary
- EC Declaration of Conformity
User Manual of IAP-1800AX & IAP-2400AX
- 38 -
2.2.3 Side Wall Mount Plate Mounting
To install the Industrial 802.11ax Wireless AP on the wall, please follow the instructions below.
Step 1: Remove the DIN-rail from the Industrial 802.11ax Wireless AP. Use the screwdriver to loosen
the screws to remove the DIN-rail.
Step 2: Place the wall-mount plate on the side panel and use the screwdriver to screw the wall mount
plate tightly on the Industrial 802.11ax Wireless AP.
Step 3: Use the hook holes at the corners of the wall mount plate to hang the Industrial 802.11ax
Wireless AP on the wall.
Step 4: To remove the wall mount plate, reverse the steps above.