User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Physical Descriptions
- Chapter 3. Preparation
- Chapter 4. Web-based Management
- Chapter 5. Quick Connection to a Wireless Network
- Appendix A: DDNS Application
- Appendix B: FAQs
- Appendix C: Troubleshooting
- Appendix D: Glossary
- EC Declaration of Conformity
User Manual of IAP-1800AX & IAP-2400AX
- 116 -
Step 4: Enter the encryption key of the wireless AP
(1) Enter the encryption key that is configured in section 5.7.2.1
(2) Click the [OK] button.
Figure 5-8: Enter the Password
If you will be connecting to this Industrial 802.11ax Wireless AP in the future, check
[Remember this network].
Step 5: Check if the AirPort is connected to the selected wireless network.
If “Yes”, then there will be a “check” symbol in front of the SSID.
Figure 5-9: Connected to the Network