User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Physical Descriptions
- Chapter 3. Preparation
- Chapter 4. Web-based Management
- Chapter 5. Quick Connection to a Wireless Network
- Appendix A: DDNS Application
- Appendix B: FAQs
- Appendix C: Troubleshooting
- Appendix D: Glossary
- EC Declaration of Conformity
User Manual of IAP-1800AX & IAP-2400AX
- 107 -
Current Time
Show the current time.
User is able to set time and date manually.
Time Zone Select
Select the time zone of the country you are currently in. The Industrial
802.11ax Wireless AP will set its time based on your selection.
NTP Client Update
Once this function is enabled, Industrial 802.11ax Wireless AP will
automatically update current time from NTP server.
NTP Server
User may use the default NTP sever or input NTP server manually.
4.5.3 Saving/Restoring Configuration
This page shows the status of the configuration. You may save the setting file to either USB storage or
PC and load the setting file from USB storage or PC as Figure 4-61 is shown below:
Figure 4-61: Save/Restore Configuration
■ Save Setting to PC
Object
Description
Configuration Export
Press the button to save setting file to PC.
Configuration Import
Press the button to select the setting file, and then
press the button to upload setting file from PC.
■ Save Setting to USB Storage
Object
Description