User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Physical Descriptions
- Chapter 3. Preparation
- Chapter 4. Web-based Management
- Chapter 5. Quick Connection to a Wireless Network
- Appendix A: DDNS Application
- Appendix B: FAQs
- Appendix C: Troubleshooting
- Appendix D: Glossary
- EC Declaration of Conformity
User Manual of IAP-1800AX & IAP-2400AX
- 102 -
4.4.5 Wi-Fi Advanced
This page allows the user to define advanced setting of Wi-Fi.
Figure 4-55: Wi-Fi Advanced
Object Description
2.4GHz Maximum Associated
Clients
The maximum users are 128.
5GHz Maximum Associated
Clients
The maximum users are 128.
2.4G Coverage Threshold The coverage threshold is to limit the weak signal of clients
occupying session. The default is -95dBm.
5G Coverage Threshold The coverage threshold is to limit the weak signal of clients
occupying session. The default is -95dBm.
2.4G TX Power
The range of transmit power is Max (100%), Efficient (75%),
Enhanced (50%), Standard (25%) or Min (15%). In case of
shortening the distance and the coverage of the wireless network,
input a smaller value to reduce the radio transmission power.
5G TX Power
The range of transmit power is Max (100%), Efficient (75%),
Enhanced (50%), Standard (25%) or Min (15%). In case of
shortening the distance and the coverage of the wireless network,
input a smaller value to reduce the radio transmission power.
2.4GHz WLAN Partition Set the function as enable or disable.
5GHz WLAN Partition Set the function as enable or disable.
RTS Threshold Enable or Disable RTS/CTS protocol. It can be used in the
following scenarios and used by Stations or Wireless AP.