Datasheet

IAP-2400AX
2
Secure Wireless Connection Features
• Full encryption supported: WPA3 Personal,WPA2/
WPA3 Personal,WPA2 Personal (AES) ,WPA2 Personal
(TKIP),WPA2 Personal (TKIP+AES),WPA/WPA2 Personal
(AES) ,WPA/WPA2 Personal (TKIP) , WPA/WPA2 Personal
(TKIP+AES) , WPA2 Enterprise, WPA/WPA2 Enterprise
• MAC ACL
Wireless AP Mode Features
• Supports OFDMA (orthogonal frequency division multiple
access)
• Supports MU-MIMO (multi-user multiple-input multiple-
output), Beamforming and BSS Coloring
• WMM (Wi-Fi multimedia) provides higher priority to
multimedia transmitting over wireless
• Coverage threshold to limit the weak signal of clients
occupying session
• Real-time Wi-Fi channel analysis chart and client limit
control for better performance
• Terminal Seamless Roaming with 802.11k, 802.11v, and
802.11r
Gateway Mode Features
• Built-in RADIUS server/Client
• Captive Portal
• UPnP
• IP routing protocol supports RIPv1/v2, OSPF
• PLANET DDNS/Easy DDNS
• SPI rewall, DDoS block, system security and NAT ALGs
• MAC address/IP/Web ltering and QoS
• DMZ and port forwarding
Easy Deployment and Management
• Supports PLANET AP Controllers in AP mode
• Self-healing mechanism through system auto reboot setting
• System status monitoring through remote syslog server
• Gateway mode supports PLANET DDNS/Easy DDNS,
Captive Portal, RADIUS Server/Client
• PLANET Smart Discovery Utility for deployment
management
• PLANET NMS system and CloudViewer for deployment
management
Benets of MU-MIMO, OFDMA, Seamless Roaming, Beamforming and BSS
Coloring
The IAP-2400AX can be installed in public areas such as hotspots, airports and
conferences as OFDMA, a multi-user version of OFDM, enables the concurrent AP
to communicate (uplink and downlink) with multiple clients by assigning subsets of
subcarriers called resource units (RUs) to the individual clients. With MU-MIMO and
Seamless Roaming technologies, it provides a better Wi-Fi user experience, reducing
the likelihood of users turning off Wi-Fi and putting more load on the cellular network.
Beamforming is to improve your Wi-Fi signal when you are far away from your router.
The BSS color is a numerical identifier of the BSS. 802.11ax radios are able to
differentiate between BSSs using BSS color identier when other radios transmit on the
same channel.
These technologies also can solve Wi-Fi congestion issues in open work spaces and
conference rooms. The IAP-2400AX can offer more powerful throughput coverage of up
to 150 client users.
■ OFDMA (Orthogonal Frequency Division Multiple Access) Benets
● Helps transmit small and large packets together to reduce bandwidth burden and
improve data transmission performance
● Transmitting data at the same time can effectively reduce the transmission delay
for longer frame and low-speed transmission.
● Improves the overall traffic quality, and effectively uses bandwidth in an
environment where multiple people use the Internet.
● Increases the number of devices that can be connected to the AP.
● Reduces the power consumption of the device by way of the use of low bandwidth.
866Mbps
400Mbps
54Mbps
173Mbps
5GHz
11 VHT80
ac
11 AHE80
ax
11 VHT40
ac
11 VHT20
ac
11
a
1200Mbps
Data Transmission Rates
11ax has Faster Data Rate than That of 11ac by
11 AHE160
ax
2400Mbps
177%
Time
Time
OFDMA
OFDM
1
3
1
Streaming
2
Web page
Media
A 75% Reduction in Delays
3
12