User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- Chapter 3. Connecting to the HDVR
- Chapter 4. Basic Operation
- Chapter 5. Main Menu
- Chapter 6. Web Remote Management
- Appendix A: Ping IP Address
- Appendix B: Planet DDNS Application
- Appendix C: Configuring Port Forwarding Manually
Hybrid Digital Video Recorder
H.265 HDVR series
41
PTZ Activation: Set the PTZ activation when the alarm is turned on.
In hybrid mode, PTZ links to the related PTZ information of analog channel. While in digital
channel model, PTZ links to the related PTZ information on the remote device which is
connected.
To link PTZ, you can leave for [Shortcut menu]->[PTZ control] to set preset
point, cruise between points and interval time, etc.
Picture 5.7 PTZ Activation in Hybrid Mode
Show message: Pop-up the dialog box of alarm information on the screen of the local host
computer.
Send email: It means sending an email to user when the alarm is turned on.
Set in the Email function and make a mail testing first.
FTP upload: When it is enabled, the video and picture of the related record channel and
snapshot channel will be uploaded to an assigned position.
FTP upload needs to be set at Netservice interface.