User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- Chapter 3. Connecting to the HDVR
- Chapter 4. Basic Operation
- Chapter 5. Main Menu
- Chapter 6. Web Remote Management
- Appendix A: Ping IP Address
- Appendix B: Planet DDNS Application
- Appendix C: Configuring Port Forwarding Manually
Hybrid Digital Video Recorder
H.265 HDVR series
36
Picture 5.1 Record Configuration
Channel
Choose the corresponding channel number to set the channel.
Choose the all option to set the entire channels.
Redundancy
Choose the redundancy function option to implement the file
double backup function. Double backup is writing the video files
in two hard disks. When you do the double backup, make sure
that there are two hard disks installed. One is read-write disk and
the other is redundant disk. (refer to 5.8.1)
Length
Set the time length of each video file. 60 minutes is default value.
Record Mode
Schedule: Record according to the set video type (common,
detection and alarm) and time section.
Manual: Click the button and the channel is recording no matter
what state it is in.
Stop: Click the stop button and the channel stops recording no
matter what state it is in.
Day
Select the day you want to record. The options include
Sunday/Monday/Tuesday/Wednesday/Thursday/Friday/Saturday
and All.
Period
Set the time section of common recording, The recording will
start only in the set range. Meanwhile, the motion recording also
can be set in this function.