User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- Chapter 3. Connecting to the HDVR
- Chapter 4. Basic Operation
- Chapter 5. Main Menu
- Chapter 6. Web Remote Management
- Appendix A: Ping IP Address
- Appendix B: Planet DDNS Application
- Appendix C: Configuring Port Forwarding Manually
Hybrid Digital Video Recorder
H.265 HDVR series
26
4.3.3 Guide
Select “Cloud” to enable cloud service function.
Select “Will no longer be prompted”, HDVR will not display Guide interface after boot.
Click “Next Page” button to enter next option.
Picture 4.4 Guide
4.3.4 PTZ Control
PTZ control is a little different between analog mode and full digital mode.
1) Digital channel – the digital channel needs to link PTZ; the remote device should connect
with PTZ with protocol correctly set also.
2) Analog channel – Only when the device is connecting with PTZ and configuring protocol
correctly is OK.
Operation interface is shown below. The functions include PTZ direction control, speed, zoom,
focus, iris, preset, tour, auto pan and so on.
1. When Decoder A (B) line connects with HDVR A (B) line, the connection is
right.
2. Click [main menu] > [system configuration] > [PTZ configuration] to set the
PTZ parameters.
3. The PTZ functions are decided by the PTZ protocols.