User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- Chapter 3. Connecting to the HDVR
- Chapter 4. Basic Operation
- Chapter 5. Main Menu
- Chapter 6. Web Remote Management
- Appendix A: Ping IP Address
- Appendix B: Planet DDNS Application
- Appendix C: Configuring Port Forwarding Manually
Hybrid Digital Video Recorder
H.265 HDVR series
38
5.5 Sensor Function
Sensor function includes motion detection, video blind, video loss and abnormality.
5.5.1 Motion Detection
When system detects the motion signal that reaches the set sensitivity, the motion detection
alarm is on and the linkage function is turned on. The details are shown below.
Digital channel: It not only enables motion detection function at the local side, but also
enables the remote device that is connected. When remote device detects motion movement,
the local side will start alarm recording, provided this function is not enabled.
Picture 5.4 Motion Detection
Channel
Choose the set motion detection channel.
Enable
The motion detection function is on when the box is checked.
Sensitivity
Six options are provided in the sensitivity.