User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- Chapter 3. Connecting to the HDVR
- Chapter 4. Basic Operation
- Chapter 5. Main Menu
- Chapter 6. Web Remote Management
- Appendix A: Ping IP Address
- Appendix B: Planet DDNS Application
- Appendix C: Configuring Port Forwarding Manually
Hybrid Digital Video Recorder
H.265 HDVR series
40
Interval/Sec.
Only one alarm signal is turned on even there are several
motion detection signals in the set interval.
Record delay/Sec.
Delay a few moments and stop when the alarm state is turned
off. The default is 10 seconds.
Record Channel
Choose the recording channel (multiple options supported).
Trigger the video signal when the alarm is turned on.
Tour
It means that the selected channel is single window alternate
patrol preview. The interval is set in the [Main Menu]>[System]
> [Tour].
Picture 5.5 Region
Picture 5.6 Set the Time Section