User's Manual

720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE
HDP-5260PT
28
WAN
Field Name Description
WAN Status
Current subnet mask The current subnet mask
Current IP gateway The current gateway IP address
MAC address The MAC address of the equipment
WAN Settings
Select the appropriate network mode. The equipment supports three network modes:
Static
Network parameters must be entered manually and must not be changed.
All parameters are provided by the ISP.
DHCP Network parameters are provided automatically by a DHCP server.
PPPoE
Account and Password must be input manually. These are provided by
your ISP.
If Static IP is chosen, the screen below will appear. Enter values provided by the ISP.
1. After entering the new settings, click the APPLY button to save the new settings.
2. If a new IP address is entered for the equipment, it must be used to login to the phone
after clicking the APPLY button.
3. If the system obtains an IP address from the DHCP server, the same IP address can also
be used for a LAN network, but not for a WAN network.
802.1X Settings
User 802.1X user account
Password 802.1X password
Enable 812.1X Enable or Disable 812.1X
CA Certificate
Choose the CA Certificate and then click upload to
upgrade
Device Certificate Choose the Device Certificate and then click upload to upgrade