720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT 720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID and PoE HDP-5260PT 1
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT Copyright Copyright 2016 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of PLANET.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Federal Communication Commission (FCC) Radiation Exposure Statement This equipment complies with FCC radiation exposure set forth for an uncontrolled environment.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT Table of Contents Chapter 1. Product Introduction ..................................................................................................................... 6 1.1 Package Contents ....................................................................................................................... 6 1.2 Overview ....................................................................................................
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT 3.7 3.8 3.6.3 Door Access ............................................................................................................... 49 3.6.4 Door Log..................................................................................................................... 50 Door Phone................................................................................................................................ 52 3.7.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT Chapter 1. Product Introduction 1.1 Package Contents The package should contain the following: ■ ■ ■ ■ ■ ■ 1 x HDP-5260PT 1 x Quick Installation Guide 1 x Mounting Label 1 x Screw Kit 1 x Connectors and Wrench 3 x RFID Card If any of the above items are missing, please contact your seller immediately. 1.2 Overview Security is Ensured with PLANET Video Door Phone PLANET HDP-5260PT is a SIP Door Phone with PoE feature.
20p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT Keyless Control and Convenience PLANET HDP-5260PT advancements in residential door lock security have been enhanced with secure authentication technology which supports many ways of opening door without a key. The door not only can be open via an RFID card but also a password if it is an electronic door lock. Thus, you can enter your home without having to use a key. SIP 2.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT A Door Guard for Extreme Conditions The HDP-5260PT comes with a robust door intercom for apartment complexes to ensure maximum resilience and security. Its camera with night vision and resilience to dust, water (IP65) and vandalism (IK10) is watchful, making sure the area remains safe.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT Finding the Door Phone via Planet Search Tool PLANET Search Tool is a simple, freely-available application for locating intercoms from the IP family in the network. After searching the network, the application shows the device name, firmware version and IP address of all intercoms found on a chart. This simplifies the administration and installation of intercom systems.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT 1.3 Specifications Product HDP-5260PT Camera Image Device 1280 x 760, CMOS Video Codec H.264/H.263 Image Codec JPEG/PNG/BMP/GIF Video Format MP4/3GP/FLV Monitoring Range 5 meters LED White LED x 3, effective up to 5 meters Video Video Codec H.264/H.263 Image Codec JPEG/PNG/BMP/GIF Video Format MP4/3GP/FLV Frame Rate 10~30fps Audio Audio Streaming Two-way audio Narrowband Codec G.711a/u, G.723.1, G.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT RTP/RTCP/SRTP STUN OpenVPN SNTP FTP/TFTP HTTP/HTTPS TR069 Functions Intercom, RFID card, call log, open door log, programmable DSS key, network time synchronization, speed dial, auto-answering, hotline General Keypad 13 keys, including 12 standard phone digits keys 1 hands-free key or DSS keys (speed dial) Power Requirements 802.3af, Class 3 Net Weight 1.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT Chapter 2. Hardware Interface 2.1 Physical Descriptions Product Dimensions (W x D x H) 223 x 130 x 74 mm Net Weight 1.52kg Front Panel Interface Wall-mount Housing CMOS Sensor Speaker Description IP65 and IK10 outdoor housing for rigorous environment. The door phone has a built-in IP camera supporting a high-resolution video of up to 1280 x 720 pixels.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT Interface Mics RFID Reader Description The door phone has two built-in microphones hidden in the pinholes located on the front panel. Use RFID cards to unlock the door by touching RFID reader of device. Button Definition Button DSS Key Numeric Keyboard Description Press the Direct Station Selection key to check who the caller is before opening the doors, or talking to him/her. Input password to open the door or calls.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT I/O Control Instruction After removing the front panel of the HDP-5260PT, there are two terminal block connectors for power connection and digital I/O connections as shown below: Electric-lock Power Connector Connector 14
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT Power Connector The HDP-5260PT requires either IEEE 802.3af/at PoE or DC power from the power connector. The picture shows the two-pin connector comes with system power source of 12V DC, 1A (maximum for the two-pin connector).
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT 2.2 Hardware Installation The HDP-5260PT is constructed of four parts as shown below. Prior to the installation, the installer is required to remove the front panel of the HDP-5260PT for wall mounting. Please follow the steps below for the installation. Figure 1 Four Major Parts of HDP-5260PT Step 1: Installation Preparation A.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT Step 2: Drilling Figure 2 Wall Mounting A. Place the mounting template with dimensions on the surface of a wall in a desired flat position. B. Use an electric drill to drill the 4 holes marked on the mounting template. It is recommended to drill about 50mm deep. Remove the template when finishing drilling. C. Push or hammer screw anchors into the drilled holes.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT Step 3: Removing Front Panel A. With hex wrench, remove the front panel as shown in Figure 3 (Turn counter-clockwise) and Figure 4. Figure 3 B. Figure 4 With Phillips screwdriver, unpack the rain shade and the main part of the intercom as shown in Figure 5.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT Step 4: Back Panel Fixing and Cabling cm x 40 mm Figure 6 Figure 7 A. Select the hole for cable supply; cable length of 15cm to 20cm is recommended. B. With 4 TA5 x 40mm screws, tighten the back panel on the wall as shown in Figure 6. The direction of the cable hole on the back panel should be pointing down. C.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT Step 5: Mounting M4 x 16 mm Figure 8 MP3 x 16 mm Figure 9 A. Use the 6 screws to tighten the main part (together with the rain shade) of the intercom on the back panel as shown in Figure 8. B. Push the front panel into the plastic frame and tighten it with 6 screws as shown in Figure 9. Make sure the screws have been tightened properly for better waterproof effect.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT 2.3 Initial Utility Installation There are two methods as shown below to search the HDP-5260P. Method 1: Open the Planet Door Phone Finder Utility. Press the Refresh button to search the HDP-5260PT and find the IP address. Method 2: Press and hold the “#” key for 3 seconds and the door phone will report the IP address by voice. Default Setting Default DHCP Client On Default IP Address 172.16.0.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT Chapter 3. Web-based Management Please take a few minutes to read through this guide to familiarize with the steps required to set up your door phone. This chapter provides setup details of the door phone Web-based Interface. 3.1 Introduction When the device and your computer successfully connect to the network, enter the IP address of the device. You will see the Webpage management interface login screen.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT 3.2.1 Status On this page, you can see the information of the network connection mode and accounts. Status Field Name Network Accounts Description Shows the configuration information for WAN port, including connection mode of WAN port (static, DHCP or PPPoE), MAC address and IP address of WAN port. Shows the phone numbers and registration status for the 2 SIP lines.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT 3.2.2 Wizard A. Select the appropriate network mode. The equipment supports three network modes: B. Static IP mode is selected; click to go to Quick SIP Settings or click to return to the Wizard screen.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT C. This step is for registration to IP PBX. Please fill in the IP of IP PBX, Authentication User name and Authentication Ppassword. Tick . D. Check the information that you have filled in, and then click .
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT 3.2.3 Language Select the language you prefer and click . 3.2.4 Time & Date Set the time zone and SNTP (Simple Network Time Protocol) server on this page to automatically obtain time and daylight saving time, and manual time and date entry.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT 3.3 Network 3.3.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT WAN Field Name Description WAN Status Current subnet mask The current subnet mask Current IP gateway The current gateway IP address MAC address The MAC address of the equipment WAN Settings Select the appropriate network mode. The equipment supports three network modes: Network parameters must be entered manually and must not be changed. Static All parameters are provided by the ISP.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT Service Port Settings Web Server Type Specify Web Server Type – HTTP or HTTPS Port for web browser access. Default value is 80. To enhance security, change this from the default. Setting this port to 0 will disable HTTP access. HTTP Port For example, the IP address is 192.168.1.70 and the port value is 8090, the accessing address is http://192.168.1.70:8090. Port for HTTPS access.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT divide a network by restricting the transmission of broadcast frames. In practice, VLANs are distinguished by the use of VLAN IDs.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT QoS & VLAN Field Name Description Link Layer Discovery Protocol (LLDP) Settings Enable Learning Function Packet Interval Enables the telephone to synchronize its VLAN data with the Network Switch. The telephone will automatically synchronize DSCP, 802.1p, and VLAN ID values even if these values differ from those provided by the LLDP server.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT Web Filter Setting Select and click to take effect. Be sure that the filter range includes the IP address of the configuration computer. 3.3.4 Security Security Field Name Update Security File Delete Security File Description Select a security file in the field to be updated. Click the Update button to update. Select a security file in the field to be deleted. Click the Delete button to delete.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT 3.3.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT 3.4 VoIP 3.4.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT SIP Field Name Description Basic Settings (Choose the SIP line to be configured) Shows registration status. If the registration is successful, the display will be Status registered; if not successful, the display will not be registered. If a wrong password is given, a 403 error will be shown. Server Address SIP server IP address or URI. Server Port SIP server port. Default is 5060.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT SIP Field Name Enable Session Timer Description If enabled, this will refresh the SIP session timer per RFC4028. Registration SIP re-registration time. Default is 60 seconds. If the server requests a different time, Expires the phone will change to that value. Session Timeout Refresh interval if Session Timer is enabled. Specifies the NAT keep alive type.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT Field Name Description above 1500 bytes Enable DNS SRV Enables use of DNS SRV records SIP Global Settings Enable Strict Branch -- The value of the branch must be after”z9hG4bK” in the VIA Strict Branch field of the INVITE message received, or the phone will not respond to the INVITE. Note: This will affect all lines. Enable Group Enable SIP Group Backup. This will affect all lines.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT STUN Field Name Description STUN NAT Traversal Shows whether or not STUN NAT Transversal is successful. Server Address STUN Server IP address Server Port STUN Server Port – Default is 3478. Binding Period STUN binding period – STUN packets are sent at this interval to keep the NAT mapping active. SIP Waiting Time Waiting time for SIP. This will vary depending on the network.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT 3.5 Intercom This part is about the intercom of the HDP-5260PT including DSS Key (Function Key), audio and video, DND, etc. 3.5.1 Function Key As for the programmable keys in phone software (depending on hardware), you can configure a different feature for each key. You can refer to indications below for each feature. The default is NA, meaning without any feature settings.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT DSS Key Type Number Line Subtype Usage In speed dial mode, you Fill out the Hot Key Speed Dial called The SIP account party’s SIP corresponding account or lines can define whether this call is allowed to be hung up by re-pressing the speed dial. In intercom mode, if the caller’s IP phone address Intercom supports intercom feature, auto answer can be realized. DSS Key Type Number Subtype Usage G.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT 3.5.2 Audio & Video This page configures audio parameters such as voice codec, speak volume, mic volume and ringer volume. Audio & Video Field Name Description Audio Settings First Codec Second Codec Third Codec Fourth Codec The first codec choice: G.711A/U, G.722, G.723.1, G.726-32, G.729AB The second codec choice: G.711A/U, G.722, G.723.1, G.726-32, G.729AB, None The third codec choice: G.711A/U, G.722, G.723.1, G.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT Audio & Video Field Name Description SPK Output Volume Set the speaker volume level. Broadcast Output Volume Set the broadcast output volume level. Signal Tone Volume Set the audio signal output volume level. Enable VAD Enable or disable Voice Activity Detection (VAD). If VAD is enabled, G729 Payload length cannot be set greater than 20 mSec. Video Settings Video Codec Set the video codec used in video call (H.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT DND Field Name Description DND Methods Settings DND option Set the DND option; default is phone. DND Line Settings SIP1 Enable or Disable SIP1 DND SIP2 Enable or Disable SIP2 DND DND Global Settings Enable DND Timer Enable or disable DND timer DND Timer Set the DND time Enable White List DND Enable or disable white list DND 3.5.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT Feature Field Name Description Enable Auto Answer Enable or disable auto answer. Enable Auto Answer Enable or disable auto answer. Call Switched Time Set the call switched time. Auto Answer Timeout Set the auto answer time Dial Fixed Length The number will be sent to the server after the specified digits are dialed. Description Device IP description 3.5.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT 3.5.6 Action URL Action URL Settings URL for various actions performed by the phone. These actions are recorded and sent as xml files to the server. Sample format is http://InternalServer /FileName.xml 3.6 Door Phone This part focuses on the door phone function including card management, add/remove card and log.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT 3.6.1 Door Phone Door Phone Field Name Description Initial Value EGS Settings Mono-stable: There is only one fixed action status for door unlocking. Switch Mode Bi-stable: There are two actions and statuses for door unlocking and door locking. Each action might be monostable triggered and changed to the other status. After changing, the status would be kept. Only password: password input only, dialing would be forbidden.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT Door Phone Field Name Description Initial Value password length is 4. Description Device description displayed on IP scanning tool HDP-5260PT Video software. Sip Door phone Enable Access Table: enter for Enable Access Table opening door during calls. Disable Access Table: enter for Enable opening door during calls.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT 3.6.2 Door Card Door Card Field Name Description Door Card Table Index The serial number of issuer card. Name The name of issuer card. ID The number of issuer card. (Note: The card not registered in the remote access list is unable to open the door.) Issuing Date The issuing date of issuer card. Card State The state of issuer card. Delete Click to delete the door card list within the selected ID card.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT Door Card Field Name Description Card Issuing: In the issuing mode, just put the card in the slot to add ID cards. Card Revoking: In the revoking mode, just put the card in the slot to delete ID cards. Administrator Table Showing the ID, Date and Type of Amin Card. Add Administrator ID: admin card number. Type: Issuer and Revoking. In the normal state for entry, swipe the card (issuing card).
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT Door Access Field Name Description Access Table According to entrance guard access rules, single or multiple rules on this list can be chosen to delete operation.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT the link to save target as the door log can be exported in the CSV format. Door Log Field Name Description Door Opening Log Result Door Opening Time Duration Access Name Show the results of door opening Opening time for the door Duration of opening the door. If the door is open remotely or with a card, it will display access to the name remotely. 1. Open the door by swiping the card that shows the card number.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT 3.7 Door Phone 3.7.1 Auto Provision The equipment supports PnP, DHCP, and Phone Flash to obtain configuration parameters. They will be queried in the following order when the equipment boots. DHCP option → PnP server → Phone Flash Auto Provision Field Name Description Auto Provision Settings Show the current config file’s version.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT Auto Provision Field Name Description Password Password for configuration server. Used for FTP/HTTP/HTTPS.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT Auto Provision Field Name Description 3. Update at time interval – update at periodic update interval TR069 Settings Enable TR069 Enable or disable TR069 configuration Enable TR069 Warning Tone Enable or disable TR069 Warning Tone ACS Server Type Select Common or CTC ACS Server Type. ACS Server URL ACS Server URL. ACS User User name for ACS. ACS Password ACS Password.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT Level 2: critical -- System is probably working incorrectly. Level 3: error -- System may not work correctly. Level 4: warning -- System may work correctly but needs attention. Level 5: notice -- It is the normal but significant condition. Level 6: Informational -- It is the normal daily messages. Level 7: debug -- Debug messages normally used by system designer. This level can only be displayed via telnet.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT 3.7.3 Config Config Field Name Description Save Save the current equipment configuration. Clicking this will save all configuration Configuration changes and make them effective immediately. Backup Save the equipment configuration to a txt or xml file. Please remember to right-click on Configuration the choice and then choose “Save Link As.” Reset Content Click the "clear" button to reset phone records and photos.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT 3.7.4 Update This page allows uploading configuration files to the equipment. Upate Field Name Description Browse the config file, and press Update to load it to the equipment. Various types of Web Update files can be loaded here including firmware, ring tones, local phonebook and config files in either text or xml format. 3.7.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT 3.7.6 Reboot Some configuration modifications require a reboot to become effective. Clicking the Reboot button will cause the equipment to reboot immediately. Be sure to save the configuration before rebooting. 3.8 Logout Click from the web. When visiting the web next time, user name and password are needed.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT Appendix A: Open Door Mode 1. Local a. Local Password Go to [Door Phone]>[Door Phone] to set [Local Password] (Default is 6789.). Use the device's keypad to input password and "#" key, then the door will be unlocked. b. Private access code Go to [Add Access Rule]>[ Access Code] and enable local authentication.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT Use the device's keypad to input access code and "#" key, then the door will be unlocked. 2. Remote a. Visitors call to owner Remote Password Step 1: Go to Door Phone Set Remote Password (The default is "*"). Step 2: To answer the call made by visitor via SIP phone, press the "*" key to unlock the door for visitor. b. Owner calls to visitors Owner calls to visitors via SIP phone.
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT 61
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE HDP-5260PT Appendix B: How to use ICF-1800 to open door via DTMF code Step 1. Install HDP-5260PT x 3 (HDP-5260PT-A / HDP-5260PT-B / HDP-5260PT-C) and ICF-1800 x 1 and IPX-330 x 1 at the client. Step 2. Register account at each door phone or VoIP phone to IPBPBX. HDP-5260PT-A = 201 HDP-5260PT-B = 202 HDP-5260PT-C = 203 ICF-1800 = 204 Step 3.
