Quick Guide

ManualsBrandsPLANET Technology ManualsIP Intercoms720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID and PoE

Table Of Contents

13

Step 5: Mounting

Figure 8

M4 x 16mm

Figure 9

MP3 x 16mm

A. Use the 6 screws to tighten the main part (together with the rain shade) of

intercom on the back panel as shown in Figure 8.

B. Push the front panel into the plastic frame and tighten it with 6 screws as shown

in Figure 9.

Note

Make sure the screws have been tightened properly for better

waterproof effect.