080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 1
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT Copyright Copyright 2022 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of PLANET.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure set forth for an uncontrolled environment.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT Table of Contents Chapter 1. Product Introduction ..................................................................................................................... 6 1.1 Package Contents ....................................................................................................................... 6 1.2 Overview ......................................................................................................................
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 4.6 4.7 4.8 4.5.5 Ringtones ...................................................................................................................46 4.5.6 Action URL ................................................................................................................. 48 4.5.7 Multicast ..................................................................................................................... 49 4.5.8 Intercom .......
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT Chapter 1. Product Introduction 1.1 Package Contents The package should contain the following: ■ ■ ■ ■ 1 x HDP-1260PT 1 x Quick Installation Guide 1 x Screw Kit 1 x RFID Card If any of the above items are missing, please contact your seller immediately. 1.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT unusual activity in low light. It also supports HD voice and G.722 codec that relax bandwidth limitation and provide clear communications. With dual DSS key button and the RFID system, it offers the users keyless control and convenience for opening the door without a key. The door can be opened remotely and also with a local IC/ID card if it is an electronic door lock.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT AEC (Acoustic Echo Cancellation) Acoustic Echo Cancellation (AEC) technology is adopted in PLANET’s HDP-1260PT Door Phone and SIP Indoor Touch Screen PoE Video Intercom to enable users to minimize the voice/sound signal distortion shown in the diagram below, thus guaranteeing the best-in-class sound quality. Standard Protocol Compliance The HDP-1260PT supports IETF Session Initiation Protocol 2.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 1.3 Specifications Product HDP-1260PT Access Control Door Access Dual SIP line, Dual SIP servers DTMF tones, RFID card Full-duplex Door Phone Features Default auto answer Action URL/Active URI remote control Speed dial Video Image Device 3M pixels color CMOS camera Maximum Image Transfer 1080p at 25fps Rate Video Codec H.264 Resolution 1920 x 1080 Viewing Angle 80° (H), 60° (V) Minimum Illumination 0.
80p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT Protocol and Security SIP v1 (RFC2543), v2 (RFC3261) SIP over TLS, SRTP Onvif TCP/IPv4/IPV6/UDP RTP/RTCP, RFC2198, 1889 HTTP/HTTPS/FTP/TFTP Protocols ARP/RARP/ICMP/NTP DNS SRV/ A Query/NATPR Query Primary /Secondary DNS STUN, Session timer 802.1p/q, DSCP,802.1x DTMF Mode: In-Band, RFC2833 and SIP Info Network access authority authentication: 802.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 1 100M/10M RJ45 Ethernet 1 Ethernet camera interface, supporting H264/H265 2 delay output 2 sensor short circuit input 2 exit buttons 1 recording output Connectors 1 8Ω speaker 1 analog audio output 1 external audio input 1 mic 1 tamperproof detection 1 Wiegand card reader 1 RS232 2 DSS keys Installation Wall-mount type External Power Supply DC 12V, 1A Environments Operating Temperature -20~70°C Storage Temperature -40~70°C Operating H
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT Chapter 2. Hardware Interface 2.1 Physical Descriptions Product Dimensions (W x D x H) 120 x 38 x 200 mm Net Weight 755g Front Panel Number Interface 1 IR LED 2 Camera 3 Speaker 4 RFID Sensor 5 DSS Key 1 Description The door phone provides 4 IR LEDs for clear image in low light condition. The door phone has a built-in IP camera supporting a high-resolution video of up to 1920 x 1080 pixels.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 6 DSS Key 2 7 Mic Press the Direct Station Selection key to check who the caller is before opening the doors, or talking to him/her. (Function can be set by user.) The door phone has a built-in microphone hidden in the pinhole located on the front panel.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT Number 1 2 Wiring Port Description Description (example above) Ethernet interface: Standard RJ45 interface, 10/100M adaptive; it is recommended to use Cat 5e of cable Left: 12V+ Power interface: DC 12V,1A input Right: 12V-GND Two groups of short-circuit input detection interfaces: 3, 5 For connecting switches, infrared probes, door magnets, vibration sensors and other input devices 4 ,6 7, 8 Internet RJ45/PoE Two groups of short-c
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT (Please be sure to ground the line, otherwise there will be noise.) The HDP-1260PT requires either IEEE 802.3af/at PoE or DC Power from the power connector. Power Connector The picture shows the two-pin connector that comes with the system power source of DV 12V, 1A (maximum for the two-pin connector). 1 2 +12V DC GND Reset to Factory Default Press and hold the button key for 9 seconds.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 2.2 Hardware Installation Wall mounting steps: A. Use the given screw tool to remove the cover. B. Place the back cover on the wall and mark the four holes on the wall with a pencil. C. Drill the marked four holes, place the back cover on the wall, and slightly hammer the plastic anchors through the four holes. D. Get the power cord and network cable connected, and secure it tightly with the screws .
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 2.3 Searching Door Phone The methods below show how to search the HDP-1260PT. Press and hold the DSS key for 10 seconds. When the speaker beeps rapidly, press the DSS key again quickly. When the beep stops, the intercom will report the IP address by voice. Logging in Web UI interface: Input IP address (e.g.http://172.16.0.1) into the address bar of PC’s web browser. The default user name is admin and password is 123.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT Chapter 3. Features 3.1 Dial 3.1.1 One touch dial Click "Door Phone-Call feature" in the left navigation bar to enter the phone configuration. In the “Call Button Selection” item, you can set 2 call buttons. Each button can set 4 commonly used indoor unit numbers, of which “Call Button Day 1 ~ 3” is the outgoing number during the day, and Call Button Night is the outgoing number at night. The number is a one-touch dial button.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 3.1.2 Number dialing Enter an existing SIP / IP account and press the dial key. 3.2 Swipe Click “Door Phone - Access”. In the “Access Card” items, swipe a new card to the HDP1260PT, and then press “F5” to refresh the web GUI. RFID card number will automatically appear, and then click “add” item. Use the corresponding door card to open the door by swiping the card. With one beep sound, the door is open.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 3.3 Enter Password to Open Door Click “Door Phone- Access”. In the “Access Card” items, select “password” 3.4 DTMF Open Door Click “Door Phone- Access”, and in “Open Door By DTMF Code”, click “Enabled” to configure DTMF Code to open door After setting, click the Submit button.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT The HDP-1260PT supports 3 types of DTMF: Inband, RFC 2833 and SIP INFO 21
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT Chapter 4. Web-based Management Please take a few minutes to read through this guide to familiarize with the steps required to set up your door phone. When the device and your computer successfully connect to the network, enter the IP address of the device. You will see the Webpage management interface login screen. Enter the user name and password and click the button to enter the settings screen.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT * Product Information Display the basic information of the settings, such as model, MAC address (physical address of the IP device), firmware version, and hardware version.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 4.2 Account The account in web GUI Includes 1. Basic system information; 2. Advanced account display and configure; 3. Audio, video codec display and configure. 4.2.1 Basic SIP Account Display and configure basic account information Status: Display account registration results Display Label: The label is displayed on the screen. Display Name: Send to another caller for display.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT Server IP: SIP server address can be a domain name or an IP address. Registration Period: The IP phone will automatically re-register within the registration period. SIP Server 2 Display and configure secondary server information If registration is done via secondary SIP server, the IP phone will go to both primary and secondary SIP servers together at the same time.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT from IP phones will be sent to the proxy server forcibly.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 4.2.2 Advanced This advanced web GUI can select account and also can do configurations, such like DTMF, CALL, NAT, and KEEP ALIVE as shown below: SIP account Display the current account settings or select the account to display. DTMF Display the DTMF type (Inband, RFC 2833 and Info)and DTMF info type (DTMF-Relay, DTMF, and Telephone Event) and DTMF playload (96~127) Call Display call configured items including local SIP port range.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT Use New SIP Port When Registration Fails: default enable. Peer to peer call: Enable device call from server address without preregistration. Auto Answer: Enable device auto answer when call in, default enable. Ringtones: Enable to choose phone ringtone. Invite with user phone: Enable the call msg device sent including user phone. Send MAC Info: Enable device for the MAC address when doing the registration.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT NAT IP phones can send valid data packets that keep the communication port open to the NAT server； UDP Keep Alive Messages: options, default Enabled, can choose (Enabled and Disabled)； UDP Alive Msg Interval: When UDP Keep Alive Messages is Enabled, it cannot be empty, the default is 30, [1,63] characters, only integers within [5,60]. When UDP Keep Alive Messages is Disabled, this item is not available.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 4.2.3 Codecs Codecs display and configure supported audio codecs, PTime and Codecs Payload as shown below.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT Audio Codecs Display and configure a list of available / unavailable codecs. A codec refers to a codec used to convert analog signals into digital signals or digital signals into analog signals. Familiar codecs are PCMU (G711U), PCMA (G711A), G722 (broadband codec), G729, G723_53, G723_63, G726_16, G726_24, G726_32, G726_40. Audio Codec Params PTime: Default 20ms (Disabled, 10, 20, 30, 40, 50, 60) Video Codecs Currently only support H.264.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT LAN Port Mode Configure LAN Port mode, Default is IPv4, (IPv4, IPv6, IPv4 & IPv6). LAN Port IPv4 Configure the LAN Port get IP address with IPv4. Default is DHCP (DHCP or Static IP). LAN Port IPv6 Configure the LAN Port get IP address with IPv6. Default is DHCP (DHCP or Static IP). LAN Port PPPoE Configure the PPPoE’s verification’s password & password via LAN Port.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 4.3.2 TR069 TR069 mainly display and configure TR069 parameter, which is a remote control terminal communication protocol based on CWMP(CPE WAN Management Protocol) as shown below: Active To enable or disable TR069 feature. Version To select supported TR069 version (version 1.0 or 1.1). ACS URL ACS: ACS is short for Auto configuration servers as server side. Username/Password Configure Username/Password when connecting to the ACS server.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 4.3.3 SNMP SNMP is a simple network management protocol. To display and configure SNMP settings, see below. Active To enable or disable SNMP feature. Version To select supported SNMP version [default is v1/v2 ,(v1/v2, v3)] Trusted IP Configure SNMP server IP address 4.3.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT Active: To enable or disable VLAN feature. VID: To configure VLAN id for designated port.(1~4093) Priority: To select VLAN priority for designated port.(0~7) VLAN DHCP Option To configure the VLAN property when DHCP receives the server address. Active: To Enable or disable the VLAN property when DHCP receives the server address. DHCP option: To configure DHCP and VLAN setting (128~254). QoS To display and configure QoS settings.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 802.1x To display and configure 802.1x settings. 802.1x Mode: To enable or disable 802.1x (default is disable.)(EAP-MD5, EAP-TLS, EAP-TTLS, EAP-TTLS/EAP-MSCHAPv2, EAP-TTLS/EAPGTC, EAP-PEAP/MSCHAPv2, EAP-PEAP/GTC, EAP-FAST). Provisioning Mode: When verification protocol is EAP-FAST, it can identify whether to use identity verification or without identity verification through configuring Provisioning.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT Anonymous ID: To configure anonymous ID to replace actual user ID makes user more secure. Username/password: Insert username and password when configuring. CA Certificate To provide CA Certificate index display and upload feature. Device Certificate To provide Device Certificate index display and upload feature. 4.3.6 VPN To display and configure VPN settings including enabling or disabling Open VPN, and provide VPN certificate upload.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 4.3.7 Diagnosis Diagnosis mainly support network diagnosis tools, like ping and trace route feature, and currently provide ping feature. Other functions in the next version will be completed as shown below.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 4.5 Door Phone Door phone display items and configure door phone parameters include device languages, device switch parameter, RFID parameters, time and date configure, call configure, audio and ringtone configure, etc. 4.5.1 Basic For basic display items and configure device language, device access parameters, RFID parameters, etc., see below Switch To configure door phone switch and time.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT or Bistable). Monostable means door will auto close after several times; Bistable means door will close only after get a close signal (for example swipe to open, and then swipe again to close). Switch-On Duration: default 2s, (1~3600s). Second Switch Mode: Like the first switch operation, default is Monostable. Bistable is optional. Second Switch-On Duration: Like the first switch operation, default is 2s.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 4.5.2 Time and Date Time and Date Supports manual setting or NTP (Network Time Source), NTP support Time Zone Setting & Update Interval.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 4.5.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT Timeout For Answer To configure Outgoing call, Incoming call, default is 60s, (30-120s) Hang Up After RTP Time To configure RTP Time out interval, Door phone will hang out if not Out receive command when RTP time out, default is 10s, (5-60s) Call Button To configure call button feature. Call Button Selection: can choose 2 call buttons. Call Key Night: Enable or Disable night call key.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 4.5.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT Echo Canceller To Enable or Disable Echo Canceller, Voice Active Detection(VAD) and Comfort Noise Generator(CNG) Jitter Buffer To Enable or Disable Jitter Buffer types [Adaptive (default) and Fixed). If Adaptive is selected, default min. delay is 0ms; default max. delay is 300ms; and default normal delay is 120ms. Volume Defaut Mic Volume is 5 (1-10). Default Speaker Volume is 5 (1-10). Default Recorder Volume is 2 (1-10).
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 4.5.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT Ringtones To upload, delete, ringtones setting. Distinctive Ringers Different incoming calls with different ringtones. Tones Choose different tones Door Sound Select Opening Prompt: default voice prompt (Default is disable.) Closing Prompt: default voice prompt (default or disable) Issuing Prompt: default voice prompt (Default is disable.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 4.5.6 Action URL Active To configure Action URL. Default is disable(Enable or Disable). Action URL To configure a different Action URL.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 4.5.7 Multicast To configure Multicast Setting and Priority List parameters, see below. Multicast setting Paging Barge: To configure the Multicast Paging Barge Priority, default is Disable.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT Paging Priority Active: The switch of Paging Priority Active; default is Disable (Enable or Disable). Priority List To display and configure Multicast Listening Address and Priority Level, which is the same as 1/2/3/4/5/6/7/8/9/10. 4.5.8 Intercom To configure Intercom feature parameters, based on address support, see below. Active To configure Intercom switch, default is disable (Enable or Disable).
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT Door Lock statuses To configure door sensor Detection Alarm. Door Sensor Detection Alarm 1: If door lock is closed, door sensor does not close, it will send an alert. Door Sensor Status Reverse 1: default is Disable. Door Sensor Detection Delay 1: To configure the duration after door lock close, default is 5s, (1-60s) Door Sensor Detection Alarm 2: If door lock2 is close, door sensor2does not close, it will send an alert.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT Network Connection Failed: To open the door lock when Network Connection failed, default is Disable. 4.5.10 Access To display and configure the DTMF Code and card access switches, see below. Open Door by DTMF Code Active: default is Enable (Enabled or Disabled).
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT Identity Door Phone Click “Submit” to identity Door Phone, then device will “beep” to help you know which door phone. Access Card To display and configure the card type and card register. Card Type: IC&ID card. Password: RFID card is not needed. Search By Room Number: search feature. Card register: Card user type includes Normal, Admin, Temp. Note: Admin card only for card issuing and card revoking; cannot be used for opening the door.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 4.5.12 Camera To configure LAN camera UUID and WLAN camera UUID, and camera resolution, see below.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT IP Camera Resolution: default is 1280X720. Default UUID: fixed. Cannot be changed. Custom: To auto configure WLAN camera UUID and URL address of RTSP. Or manually configure WLAN camera UUID and URL address of RTSP. ONVIF To connect Onvif camera via its username and password.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 4.6 Phonebook Phonebook on Web is to display and configure local Phonebook, remote Phonebook, call record lists and Broadsoft Phonebook. 4.6.1 Local Book Local book display and configure contact local group, local contact add and delete, and local contact including All Contacts, White List, Black List, and Favorites.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT Contact Default is White list, (All Contacts, White List, Black List, Favorites) Search Search Contact Dial Input a phone number here for calling out and hanging up via Web List Setting To edit contact’s name, number. Group To configure contact group, max support 10 groups, and edit name, ring, and description for each group. Export Format To support 3 types (.XML/.CSV/.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 4.6.2 Remote Book To display and configure remote door phone and its Refresh Interval, see below. Remote Book To configure remote book URL address and display name. Search Remote Default is Enable (Enable or Disable). Phonebook Name Refresh Interval The Refresh Interval is for receiving remote Phonebook name. Default is 3600s (120s- 2592000s).
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 4.6.3 Call History To display and classify different call logs, including All, Dialed, Received, Missed, Forwarded, see below: Call History Types Default is All (All, Dialed, Received, Missed, Forwarded).
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 4.6.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 4.7 Maintenance To display and configure doorphone maintenance features, including Upgrade, Auto Provision, System Log, Network Capture, Configuration, PnP, Call Event, Reboot and Door Log. 4.7.1 Upgrade Version The doorphone firmware and hardware version. Upgrade Click Browse to select a version file to upgrade from LAN. 4.7.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT DHCP Option To receive server ip address via DHCP custom option. Provisioning server To input the server URL address which is from the server you want, then fill out the username and password, Common AES Key, MAC-AES key. Then select “Power On” in Auto Provision and click “Auto Provision Now”, door phone will auto grade.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 4.7.3 System log Log Level Default level is 3 (Level 1-7); the higher the level is, the more secure it will become. Export Log To troubleshoot after export log. Remote Syslog To send the doorphone system log to remote syslog server after selecting Enable. 4.7.4 Network Capture Network Capture now supports 2 interfaces -- default is “eth0” and the other is “VPN”. 4.7.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 4.7.6 PnP Doorphone sends subscribed news regularly to the PnP server, and PnP server will deploy the configuration files to doorphone, and will auto upgrade. 4.7.7 Call Event Through CDR, FTP or HTTP URL, Call Event can push service to server ip address.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 4.7.8 Reboot To reboot doorphone. Auto Reboot Active: To configure Disable (Disable, Every Day, Repeatedly) Reboot Time: If “Active- Every Day” is selected, you can set this Reboot Time, for example, “22:00”. Then doorphone will reboot at 22:00 every day. Reboot Interval: If ”Active-Repeatedly” is selected, you can set this Reboot Interval, for example, “8h”. The door phone will reboot every 8hr. Reboot Now Restart. 4.7.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 66
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 4.8 Security To display and configure the Web Password Modify, Web Session, SSH, Remote Control Address IP list, Web Server Certificate and Client Certificate. 4.8.1 Basic To display and configure the Web Password Modify, Web Session, SSH, and Remote Control Address IP list.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 68
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 4.8.3 Modify password To display and configure the Web Password Modify, Web Session, SSH and Remote Control Address IP list.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT Appendix A: Troubleshootings If the following fixes cannot troubleshoot your problems, contact the supplier where the purchase is made or PLANET technical support team. Problem 1: Speed dial button light is not on Check the AC power adapter to make sure it is the original power adapter. Check the power outlet. Make sure that the power supply of the outlet into which you plug the device is working properly.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT Appendix B: Time Zone Time Zone Time Zone Name -11 Samoa -10 United States - Hawaii-Aleutian -10 United States - Alaska-Aleutian -9 United States - Alaska Time -8 Canada (Vancouver,Whitehorse) -8 Mexico (Tijuana,Mexicali) -8 United States - Pacific Time -7 Canada (Edmonton,Calgary) -7 Mexico (Mazatlan,Chihuahua) -7 United States-Mountain Time -7 United States-MST no DST -6 Canada-Manitoba (Winnipeg) -6 Chile (Easter I
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT -4 Trinidad & Tobago -4 Curaçao -3:30 Canada - New Foundland (St.
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 1 Italy (Rome) 1 Luxembourg (Luxembourg) 1 Makedonia (Skopje) 1 Netherlands (Amsterdam) 1 Namibia (Windhoek) 2 Estonia (Tallinn) 2 Finland (Helsinki) 2 Gaza Strip (Gaza) 2 Greece (Athens) 2 Israel (Tel Aviv) 2 Jordan (Amman) 2 Latvia (Riga) 2 Lebanon(Beirut) 2 Moldova (Kishinev) 2 Russia (Kaliningrad) 2 Romania (Bucharest) 2 Syria (Damascus) 2 Turkey (Ankara) 2 Ukraine(Kyiv,Odessa) 3 East Africa Time 3 Ir
1080p SIP Vandalproof Door Phone with RFID and PoE HDP-1260PT 5 Kazakstan (Aqtobe) 5 Kyrgyzstan (Bishkek) 5 Pakistan (Islamabad) 5 Russia (Chelyabinsk) 5 Russia (Yekaterinburg) +5:30 India (Calcutta) 6 Kazakstan (Astana,Almaty) 6 Russia (Novosibirsk,Omsk) 7 Russia (Krasnoyarsk) 7 Thailand (Bangkok) 8 China (Beijing) 8 Singapore 8 Australia (Perth) 9 Korea (Seoul) 9 Japan (Tokyo) +9:30 Australia (Adelaide) +9:30 Australia (Darwin) 10 Australia (Sydney,Melbourne,Canberra)
