User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- Chapter 3. Web-based Management
- Chapter 4. Z-Wave Setting
- Appendix A: Configuring Z-Wave Device via Web
- Appendix B: Configuring Z-Wave via Smart Phone
- Appendix C: Configuring the Schedule of Z-Wave Device
- Appendix D: Troubleshooting & Frequently Asked Questions
Z-Wave Home Automation Control Gateway
HAC-1000
4.5 Trigger
The Trigger tab lets the user create a trigger by entering its name, and then select a device, a
mode and a scene.
You can create a trigger when your device is selected, and set the mode and scene to “alarm”
and “heater on”. Please refer to Appendix A or B to set the Trigger.
4.6 Schedule
Using Schedule programs, you can easily program the devices’ schedule for the entire week.
You can control your devices according to schedule. Please refer to Appendix C to set the
schedule.
- 24 -