User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- Chapter 3. Web-based Management
- Chapter 4. Z-Wave Setting
- Appendix A: Configuring Z-Wave Device via Web
- Appendix B: Configuring Z-Wave via Smart Phone
- Appendix C: Configuring the Schedule of Z-Wave Device
- Appendix D: Troubleshooting & Frequently Asked Questions
Z-Wave Home Automation Control Gateway
HAC-1000
4.2 Inclusion of Z-Wave Device
The Devices tab enables you to manage devices included in the Home Automation System.
Devices are plane system compatible sensors, IP cameras and door phone devices.
To add a Z-Wave device, click Add. Once the system sets itself into learning mode, perform
the tasks described in the manuals (see Appendix A and B).
You can control your devices by classification, based on the HZS-100
Wall-mount Motion Sensor
to explain the application.
Parameters Description
¾ This parameter can be configured with the value of 1 through
255. Where 1 means it will not be triggered within 1 minute
again. Default is for 3 minutes.
¾ Temperature Unit has Celsius and Fahrenheit.
- 20 -