User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- Chapter 3. Web-based Management
- Chapter 4. Z-Wave Setting
- Appendix A: Configuring Z-Wave Device via Web
- Appendix B: Configuring Z-Wave via Smart Phone
- Appendix C: Configuring the Schedule of Z-Wave Device
- Appendix D: Troubleshooting & Frequently Asked Questions
Z-Wave Home Automation Control Gateway
HAC-1000
Chapter 3. Web-based Management
Your control gateway is ready to put you in control of your home. Please take a few minutes to
read through this guide to familiarize yourself with the steps required to set up your Z-Wave
network and your control gateway.
This chapter provides setup details of the control gateway web-based interface.
3.1 Introduction
Control gateway can be configured with your
web browser. Before configuring, please
make sure your PC is in the same IP segment
as control gateway.
Enter “
admin” in both the user name and
password fields to access interface.
3.2 Status
Here you can view the status of control
gateway.
3.2.1 Overview
Here you can view the status of control gateway.
The current System information of
control gateway.
The current Memory information of
control gateway.
- 14 -