User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- Chapter 3. Web-based Management
- Chapter 4. Z-Wave Setting
- Appendix A: Configuring Z-Wave Device via Web
- Appendix B: Configuring Z-Wave via Smart Phone
- Appendix C: Configuring the Schedule of Z-Wave Device
- Appendix D: Troubleshooting & Frequently Asked Questions
Z-Wave Home Automation Control Gateway
HAC-1000
B. Magnet Installation
To install the HAC-1000 on a magnetic surface, simply follow the following picture:
C. Ethernet Connection
There is a LAN port on the HAC-1000. Please connect to your router/switch.
2.3 Initial Utility Installation
This chapter shows how to use utility to find the IP of your control gateway. The gateway is
with the default settings. However, to help you find the network gateway quickly, the windows
utility PLANET Smart Discovery can search control gateway in the network that can help you
to configure some basic settings before you start advanced management.
Step 1: Please download the search tool from PLANET Download Center:
Step 2:
Unzip the file and run the program “SmartDiscoveryLite”.
- 11 -