(V3) User Manual

- 9 -
- 10 -
- 11 -
- 12 - - 13 -
6. Duplex Mode Support
The GTP-805A TP port supports triple speed --
10/100/1000BASE-T auto-negotiation. It will auto detect the link
speed and the duplex mode by default with its link partner. The
ber port (100/1000BASE-FX/SX/LX) allows 100/1000Mbps
full duplex by auto-negotiation. Please also check the setting
of the link partner as well.
7. LED Indication
System
LED Color Description
PWR Green Lit indicates the device is powered.
8. Cable Connection Parameter
The wiring details are shown below:
Duplex Connection Limitation (max.)
Twisted Pair
Half/Full
Node to Node
Node to Switch/Hub
100 meters
Fiber Optic Cables:
Standard
(Wavelength)
100BASE-FX
(1310nm)
1000BASE-SX
(850nm)
1000BASE-LX
(1310nm)
Fiber Type & Cable
Specications
Multi-mode 50/125μm or 62.5/125μm
Single-mode 9/125μm
9.ProductSpecications
Model GTP-805A
Interface
Copper Port
10/100/1000BASE-T Ethernet TP
interface
Auto-negotiation, auto MDI/MDI-X
with PoE injector function
SFP Interface 100/1000BASE-X SFP interface
Fiber Mode May vary on SFP Module
10/100/1000BASE-T Port
LED Color Function
LNK/
ACT
Green
Blink
Indicating that the PoE+ Media
Converter is actively sending or
receiving data over that port.
Light
Indicating that the port is linked up
at 10/100/1000Mbps.
O
Indicating that the port is linked
down.
PoE in
Use
Orange
Light
Indicating that the port is providing
PoE power to remote powered device.
O
Indicating that the port is not
providing PoE power to remote
powered device.
100/1000BASE-X Fiber Port
LED Color Function
LNK/
ACT
Green
Blink
Indicating that the PoE+ Media
Converter is actively sending or
receiving data over that port.
Light Indicating that the port is linked up.
O
Indicating that the port is linked
down.
Fiber Port Type
(connector)
SFP, LC type
Fiber Maximum
Distance
May vary on SFP Module
Power Over Ethernet
PoE Output
IEEE 802.3af Power over Ethernet
PSE
IEEE 802.3at Power over Ethernet
Plus PSE
Power Output PoE 52~56V DC, 30 watts
PoE Power Supply Type end-span
Power Pin Assignment 1/2 (+), 3/6 (-)
PoE Power Budget 30 watts
Hardware Specications
Switch Architecture Store-and-Forward
Flow Control
Back pressure for half duplex mode
IEEE 802.3x pause frame for full
duplex mode
Maximum Frame Size 9K
LED
System: PWR
Fiber 100/1000BASE-X: LNK/ACT
TP 10/100/1000BASE-T: LNK/ACT
PoE: Power-in-use
Dimensions (W
x D x H) 70 x 97 x 26 mm
Weight 0.21kg
Power Supply
52~56V DC, external AC-to-DC
adapter
LFP Mode
Enable: Shut down either TP port or
ber port that is broken
Disable: Link LED indicators still on if
connection of the other end
is broken
Installation Wall-mount or DIN-rail installation
Standards Conformance
Regulatory Compliance FCC Part 15 Class A, CE
Protocols and
Standards Compliance
IEEE 802.3 Ethernet
IEEE 802.3u 100BASE-TX/100BASE-
FX
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3z Gigabit Ethernet over
Fiber Optic
IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet
enhancements standard
Cables
TP: Cat 5/5e/6 UTP cable
Fiber: Multi-mode: 50/125μm or
62.5/125μm optic ber
Single-mode: 9/125μm optic
ber
Environment
Temperature 0~50 degrees C
Humidity 5~90% (non-condensing)
Note
1. For connection to the Gigabit Ethernet products,
please refer to the device’s technical manual.
2. Consult your dealer for DIN-rail installation.
PLANET TECHNOLOGY CORPORATION
e-mail: [e-mail] http://www.planet.com.tw
10F., No.96, Minquan Rd., Xindian Dist., New Taipei City, Taiwan, R.O.C. Tel:[phone] Fax:[phone]
EC Declaration of Conformity
I hereby confirm that the following equipment complies with the requirements set out in the
Council Directive on the Approximation of the Laws of the Member States relating to
Electromagnetic Compatibility Directive on (2014/30/EU).
Type of Product:
100/1000BASE-X to 10/100/1000BASE-T PoE+ Media Converter
Model:
GTP-805A
Produced by:
Manufacturer’s Name: Planet Technology Corporation
Manufacturer’s Address: 10F., No.96, Minquan Rd., Xindian Dist.,
New Taipei City 231, Taiwan, R.O.C.
For the evaluation regarding the EMC, the following standards were applied:
EN 55032 (2015 + AC:2016)
EN61000-3-2 (2014)
EN61000-3-3 (2013)
EN 55024 (2010 + A1:2015)
EN 55035 (2017)
Person responsible for making this declaration
Name: Kent Kang
Title: Director
Taiwan
May 29, 2018
Country
Date
Legal Signature