GTP-80x Series (V3) Datasheet

2
GTP-802/GTP-802S/GTP-805A
Fiber-optic Link Capability Extends the Range of Network Deployment
The maximum distance between the PoE PSE and PD is 100 meters. To extend the network device deployment range, the GTP-80x is integrated with ber
interface. The GTP-80x PoE+ Media Converter is used to convert optical Ethernet signal to electrical Ethernet signal that allows two different segments to
connect easily, efciently and inexpensively. It can convert 10/100/1000BASE-T signal to 1000BASE-X and provides different diverse ber connecting types to
meet different network applications.
The GTP-80x series and its ber connecting type includes:
■ GTP-802: SC Fiber Interface supports multi-mode with distance up to 220m and 550m
■ GTP-802S: SC Fiber Interface supports single-mode with distance up to 10km
■ GTP-805A: LC Fiber Interface supports multi/single mode SFP module with distance up to 120km (may vary on SFP module)
With the long ber distance support, it still sustains the transmission performance as high as 1000Mbps. It works in the high performance Store and Forward
mechanism, and can prevent packet loss with IEEE 802.3x ow control (full-duplex) and the LP (Link Fault Passthrough function) (LLCF/LLR) with the DIP
switch design. Furthermore, it can immediately alarm the administrators over the issue from the link media and provide an efficient solution to monitor the
network power usage.
Quick and Easy High Power PoE Network Deployment
The GTP-80x series provides 52V DC power over Ethernet cables -- just insert DC voltage into Cat.5/5e/6 cable, allowing the cable between the PoE
splitters (POE-161S/POE-162S/IPOE-162S) to transfer data and power simultaneously for up to 100 meters. Then it will spilt the digital data and the power
into two kinds of selectable DC outputs (5V DC/12V DC) or (12V DC/24V DC). Thus, it reduces cables and the dedicated electrical outlets on the wall,
ceiling or any unreachable place. Most of all, it also eliminates the time for installation. The high Power over Ethernet solution frees the security IP camera
and wireless AP deployment from restrictions of power outlet locations.
Applications
Flexible and User-friendly PoE Deployment
For the places difcult to nd the power outlet, the GTP-80x series provides the easiest way to power your Ethernet devices such as PLANET IEEE 802.3at
PoE+ splitter (POE-161S/POE-162S/IPOE-162S) and non PoE compliant Internet camera or wireless PoE access point. For instance, users can exibly install
the security IP camera, wireless access point and other IEEE 802.3at compliant network equipment around the corner in the public areas such as station or
freeway for surveillance demands, or build a wireless roaming environment on the campus or at the airport.
Harbor
Control Center
Railway
Freeway
Remote
Monitoring
PoE Splitter
PoE Splitter
Fiber Switch
PoE IP Camera
IP Camera
IP Camera
550m
550m~120km
10km
GTP-802S
GTP-802
GTP-805A
PoE Wireless
Access Point
Internet
DC
DC
PoE
PoE
1000
1000
1000
1000
PoE
DC
Power Line (DC)
1000BASE-SX/LX Fiber Optic
1000
1000BASE-T UTP
PoE
1000BASE-T UTP with PoE
PoE