(V2) Datasheet
GT-905A
1
Managed Gigabit Ethernet Media Converter
Remotely Managed Gigabit Converter
PLANET GT-905A 10/100/1000BASE-T to 100/1000BASE-X Managed Media
Converter is developed to meet the advanced demand of network applications but
it comes with the easy Plug and Play feature. The GT-905A provides all kinds of
10/100/1000Mbps Ethernet Media on RJ45 port and offers highly-stable Gigabit
SFP fiber performance. It supports conversion between 10/100/1000BASE-T and
100/1000BASE-X Ethernet, which includes SFP slot with single-mode or multi-
mode media as required. The Ethernet signal allows three types of segments to
connect easily, efciently and inexpensively.
User-friendly and Centralized Web Management Interface
For efficient management, the GT-905A is equipped with a remote Web/SNMP
interface. With its built-in Web-based management, PLANET GT-905A acts as
an easy-to-use, platform-independent management and configuration facility. The
GT-905A also supports standard Simple Network Management Protocol (SNMP)
and can be managed via any standard-based management software. Moreover,
the TS-1000/802.3ah OAM protocol (operation, administration, and maintenance)
supported enables remote devices to be managed and monitored by the GT-905A.
Enhanced Management Features
The GT-905A can be programmed for advanced management functions such
as IP address configuration, DHCP client function, port configuration, converter
configuration, 802.1Q tag VLAN, Q-in-Q VLAN, ingress/egress bandwidth control,
QoS and Layer protocol filter, and broadcast storm and bandwidth control to
enhance bandwidth utilization.
Easy Installation
As the GT-905A fully complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-
TX/FX, IEEE 802.3ab 1000BASE-T and IEEE 802.3z 1000BASE-LX/SX, the
Gigabit media converter is quick and simple to install via the Plug and Play
function. It can be used as a stand-alone unit or as a slide-in module to PLANET
Media Converter Chassis (MC-700, MC-1500 and MC-1500R series). The media
converter chassis can provide DC power to the GT-905A to maintain the ber-optic
network at the central location.
• Complies with IEEE 802.3 10BASE-T, IEEE 802.3u
100BASE-TX/FX, IEEE 802.3ab 1000BASE-T, IEEE 802.3z
1000BASE-SX/LX
• One-channel media conversion between 10/100/1000BASE-T
and 100/1000BASE-X
• TP port supports 10/100/1000BASE-T auto-negotiation and
auto-MDI/MDI-X
• 1000BASE-T: 2-pair Cat. 5/5e/6 UTP cable, up to 100 meters
• Choice of LC ber-connector from 100/1000BASE-X SFP
mini GBIC module (distance vary on ber transceiver or SFP
module)
• Compact size for working with PLANET MC family Media
Chassis (MC-700/1500/1500R/1500R48)
• Wall mounting
• Built-in IP-based Web interface for remote management
• Layer 2 Management Feature
– Store-and-Forward mechanism
– Built-in Web interface for remote management and setup
– Manual IP address setting/DHCP client for IP address
assignment
– SNMP v1/v2c monitor/private enterprise MIB
– Event trap and SNMP trap support
– Speed duplex mode conguration/ow control setting/
bandwidth control on TP/ber port
– Supports port status/Ethernet statistics on both TP and
ber interfaces
– Supports maximum frame size of 16K bytes
– Loop detection, and broadcast, multicast and unicast storm
control
– Management VLAN/16 IEEE 802.1Q VLAN groups/Q-in-Q
VLAN
– 802.1p tag priority/IP address priority/IP DSCP option in
Quality of Service Mode and strict priority/Weighted Round
Robin (WRR) QoS policies
– TS-1000 OAM/IEEE 802.3ah OAM/Loop Back Test
– 16 TCP/UDP Filter groups
– Password setting, IP setting and device status via Planet
Smart Discovery utility
– Firmware upgrade via remote Web interface
• External DC 5V 2A power supply
• LED indicators for easy network diagnosing
• Reset button for the factory default reset