GT-90x Series Datasheet

GT-90X
Data Sheet
1
Managed Gigabit Ethernet Media Converter
WEB/SNMP/OAM Remotely Managed Gigabit Converter
PLANET's GT-90x series is a 10/100/1000Base-T to 1000Base-LX / SX Managed
Media Converter developed to fulfill the advanced demand of Network
applications equipped with 'plug and play' features. The GT-90x series provides
a exible soultuion that accepts a variety of 10/100/1000Mbps Ethernet Media
on its RJ-45 port and offers stable Gigabit fiber performance. It supports
conversion between 10/100/1000Base-T and 1000Base-LX / SX networks,and
are compatible with SC / SFP / WDM connectors (with single-mode or multi-
mode media as required). The Ethernet signal allows three types of segments
to connect easily, eciently and inexpensively.
User-Friendly Web Management Interface
For ecient management, the GT-90x series Managed Gigabit Ethernet Media
Converter is equipped with a remote Web / SNMP interface. With its built-in
Web-based management, PLANET's GT-90x series uses a user-friendly, platform-
independent, management and conguration interface. The GT-90x series also
supports standard Simple Network Management Protocol (SNMP) and can be
managed via any standard-based management software. In addition, the TS-
1000/802.3ah OAM protocol (operations, administration, and maintenance)
features all the GT-90x to remotely manage devices.
Enhanced Management Features
The GT-90x series can be programmed for advanced management functions
such as IP address configuration, DHCP Client function, port configuration,
converter configuration, 802.1Q Tag VLAN, Q-in-Q VLAN, Ingress/Egress
bandwidth control, QoS and Layer protocol filter, broadcast storm and
bandwidth control, to enhance bandwidth utilization.
'Plug and Play' Installation
The GT-90x series Managed Gigabit Ethernet Media Converter complies with
IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and
IEEE 802.3z 1000Base-LX / SX standards. The Gigabit media converter features
a simple 'plug and play' installation. This GT-90x series can be used as a stand-
alone unit or as a slide-in module to PLANET's Media Converter Chassis (MC-
700, MC-1000 and MC-1500). The media converter chassis can provide DC
power to the GT-90x series and maintain a fiber-optic network at a central
location.
Key Features
• Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX,
IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX
• One-channel media conversion between 10/100/1000Base-T
and 1000Base-SX / LX
• TP port supports 10/100/1000Base-T auto-negotiation and
auto-MDI/MDI-X
• 1000Base-SX: 50/125μm or 62.5/125μm multi-mode ber
cable, up to 220/550m on GT-902
• 1000Base-LX: 9/125μm single-mode cable provides long
distance for 10km on GT-902S
• 1000Base-LX WDM interface for up to 15km (single-mode ber
9μm/125μm) on GT-906A15/B15
• 1000Base-LX WDM interface for up to 60km (single-mode ber
9μm/125μm) on GT-906A60/B60
• 1000Base-T: 2-pair Cat. 5/5e/6 UTP cable, up to 100 meters
• Compact size for working with PLANET MC family Media
Chassis (MC-700/1000R/1500)
• Wall-mountable hardware design
• Built-in IP-based Web interface for remote management
• Layer 2 Management Feature
- IEEE 802.3x PAUSE Frame Flow Control for Full-Duplex mode
- Store-and-Forward mechanism
- Built-in Web interface for remote management and setup
- Manual IP address setting / DHCP client for IP address
assignment
- SNMP v1 / v2c monitor / private Enterprise MIB
- Event trap and SNMP trap support
- Speed duplex mode conguration / Flow Control setting /
bandwidth Control on TP / Fiber port
- Supports Port Status / Ethernet Statistics on both TP and
Fiber interface
- Supports Maximum frame size to 16K bytes
- Loop detection / Broadcast / Multicast / Unicast storm control
- Management VLAN / 16 IEEE 802.1Q VLAN groups / Q-in-Q
VLAN
- 802.1p Tag Priority / IP address priority / IP DSCP option in
Quality of Service Mode and Strict Priority / Weighted Round
Robin (WRR) QoS policies
- TS-1000 OAM / IEEE 802.3ah OAM / Loop Back Test
- 16 TCP / UDP Filter groups
- Password setting, IP setting and devices description setting
through Planet Smart discovery utility
- Firmware upgrade via remote Web interface
• External DC 5V 2A power supply
• LED indicators for easy network diagnosing
• Reset Button at the front panel for the factory default reset
• Choice of ber-connector from SC, LC, WDM, multi-mode /
single-mode ber /1000Base-SX / LX mini GBIC module
www.planetechusa.com