GT-80x Series Datasheet

Data Sheet
1
GT-80x
1
10/100/1000Base-T to 1000Base-SX/LX Gigabit
Media Converter
Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ-45 port and highly
stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-805A and GT-806A/B
media converters support conversion between 10/100/1000Base-T and 1000Base-LX/SX
network. There are SC/SFP/WDM connectors with single-mode or multi-mode media as
required. The Ethernet signal allows three types of segments to connect easily, efciently
and inexpensively.
Distance Extension with High Performance and Steady Network
Communications
PLANET GT-80x gigabit media converter series extends communication distance
with highly Gigabit performance via fiber optic cable. The GT-80x series provides
media conversion between 10/100/1000Base-T and 1000Base-SX/LX interfaces such
as multi-mode LC/SC connectors (220m / 550m), single-mode LC/SC connectors
(10/20/30/40/50/70/120km) and single ber connectors (WDM, 15/60km) for various ber
optic applications.
Enhanced Smart Management Features
The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to
congure the Link Fault Pass through function (LFP). The LFP function includes the Link
Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm
administrators the problem of the link media and provide efcient solution to monitoring
the net. The DIP switch can disable or enable the LFP function. The LLCF means when
a device connected to the converter and the TP line loses the link, the converter’s ber
will disconnect the link of transmission. The LLR (Link Loss Return) means when a
device connected to the converter and the fiber line loses the link, the converter’s fiber
will disconnect the link of transmission. Both can immediately alarm administrators the
problem of the link media and provide efcient solution to monitoring the net.
Physical Port
• Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-
TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX.
• TP port supports 10/100/1000Base-T auto-negotiation and auto-
MDI/MDI-X.
• 1000Base-SX: 50/125μm or 62.5/125μm multi-mode ber cable,
up to 220/550m (GT-802).
• 1000Base-LX: 9/125μm single-mode cable provides long
distance for 10km (GT-802S).
• 1000Base-LX WDM interface for up to 15km (single-mode ber
9μm/125μm) on GT-806A15/B15.
• 1000Base-LX WDM interface for up to 60km (single-mode ber
9μm/125μm) on GT-806A60/B60.
• 1000Base-T: 2-pair Cat. 5/5e/6 UTP cable, up to 100 meters.
• Layer 2 key Features
–
IEEE 802.3x full-duplex ow-control and back-pressure in
half-duplex eliminate the loss of packets
–
Supports auto MDI/MDI-X function
–
Store-and-Forward mechanism
–
Non-blocking full wire-speed forwarding rate
• Media conversion between 10/100/1000Base-T and 1000Base-
SX/LX.
• Fiber media allows:
–
Multi-mode ber using SC/LC/WDM connector;
–
Single-mode ber using SC/LC/WDM connector
• Compact size for working with PLANET MC family media
chassis (MC-700 / MC-1500 / MC-1500R / MC-1500R48)
• Wall-mountable design
• LED indicators for easy network diagnostics
• Provides DIP switch for LFP function (Disable / Enable) setting
• OAM TS-1000 supported
• 9K Jumbo Frame Supported
• Choice of ber-connector from SC, LC and WDM, multi-mode /
single-mode ber for 1000Base SFP interface
• Compact in size, easy installation