Datasheet

ManualsBrandsPLANET Technology ManualsGigabit Media Converter802.3at PoE+ PD 10/100/1000BASE-T to 100/1000BASE-X SFP Media Converter

GT-805A-PD

Gigabit Networking with Energy Savings

In line with the energy-saving trend worldwide, PLANET has delivered a new-

generation Gigabit Networking PoE PD Media Converter, GT-805A-PD. The GT-

805A-PD incorporates the following advanced concepts:

■ IEEE 802.3af/at/bt 48V~54V DC in-line power input

■ Easy to install and use

■ Compact-sized design

■ Simple troubleshooting

PLANET GT-805A-PD is an 802.3at PoE+ PD 10/100/1000BASE-T to

100/1000BASE-X SFP Media Converter equipped with a convenient and cost-

effective 802.3af/at/bt PoE power injection solution. It is quite different from the

earlier version of PLANET media converter family that needs to obtain power

from DC power adapter; it can power on via various IEEE 802.3at/bt PoE PSE

equipment.

802.3at PoE+ PD 10/100/1000BASE-T to 100/1000BASE-X SFP

Media Converter

Physical Port

• Media conversion between 10/100/1000BASE-T and

100BASE-FX/1000BASE-SX/LX

• TP Port supports 802.3af/at/bt PoE 48V-54V DC in-line-

power

• TP port supports 10/100/1000BASE-T auto-negotiation and

auto-MDI/MDI-X

• Fiber media allows

– Multi-modeberusingLCconnector

– Single-modeberusingLCconnector

• 100BASE-FX/1000BASE-SX/LX:50/125μm/62.5/125μm

multi-modebercableor9/125μmsingle-modecable

provides a distance depending on SFP module

• 1000BASE-T:4-pairCat.5/5e/6UTPcable,upto100

meters

Power over Ethernet

• Compatible with IEEE 802.3bt Power over Ethernet plus plus

end-span + mid-span PSE

• Compatible with IEEE 802.3at Power over Ethernet plus

end-span/mid-span PSE

• Backward compatible with IEEE 802.3af Power over

Ethernet

Standard

• Complies with IEEE 802.3 10BASE-T

• Complies with IEEE 802.3u 100BASE-TX/100BASE-FX

• Complies with IEEE 802.3ab 1000BASE-T

• Complies with IEEE 802.3z 1000BASE-SX/LX

• IEEE802.3xfull-duplexandhalf-duplexbackpressureow

control to eliminate packet loss

• IEEE 802.3af Power over Ethernet

• IEEE 802.3at Power over Ethernet Plus

• IEEE 802.3bt 4-pair Power over Ethernet Plus Plus (Type 3)

• IEEE 802.3bt 4-pair Power over Ethernet Plus Plus (Type 4)

Layer 2 Features

• Store-and-Forward mechanism

• Non-blocking full wire-speed forwarding rate

• IEEE 802.1Q Tag VLAN transparent, multicast pass through

• 9Kjumboframe

• IEEE802.3xfull-duplexandhalf-duplexbackpressureow

control to eliminate the loss of packets

TwoKindsofPowerInputDesignsforFlexibleInstallation

The GT-805A-PD features two kinds of power input system designs (IEEE 802.3af/

at/bt 48V~54V DC in-line power and optional 5V DC input) incorporated into

customer’s network to enhance system reliability and uptime. However, that has to

depend on the kind of Ethernet environment that is needed, be it the GT-805A-PD

operated as a PoE PD media converter or standard Gigabit media converter with

optional 5V DC input.

Summary of content (8 pages)

PAGE 1
GT-805A-PD 802.3at PoE+ PD 10/100/1000BASE-T to 100/1000BASE-X SFP Media Converter Physical Port • Media conversion between 10/100/1000BASE-T and 100BASE-FX/1000BASE-SX/LX • TP Port supports 802.
PAGE 2
GT-805A-PD No Power Outlet Required • DIP switch for LFP function (Disable/Enable) setting 1000 PoE 802.3af/at/bt PoE Device Mechanical 1000BASE-SX/LX PoE 220m~120km 100 meters Gigabit Fiber Switch • LED indicators for easy network diagnostics • Wall mounting or DIN-rail installation GT-805A-PD • Compact in size, easy installation Optional DC 5V Power Adapter • Two power input designs (IEEE 802.
PAGE 3
GT-805A-PD Remote Link Normal Monitoring Center IP Camera 1000 Fiber Cable PoE Copper Cable LFP Enabled Copper Cable LFP Enabled Remote Link Broken 5 Copper Link Down IP Camera Fiber Cable PoE LFP disconnects PoE 1000 Copper Cable 4 Copper Link 1 Copper Link Broken 3 Fiber Link Down Monitoring Center LFP Enabled LFP Enabled 2 LFP disconnects Fiber Link 1000BASE-T UTP PoE 1000BASE-T UTP with PoE 1000 1000BASE-SX/LX Fiber Optic Can be Easily Deployed as Standalone Unit or with Chas
PAGE 4
GT-805A-PD Applications The Combination of PoE PD and Gigabit Ethernet Distance Extension Since the Gigabit RJ45 port of the GT-805A-PD provides PoE PD power in-line interface, the GT-805A-PD can obtain PoE power from any 802.3af/at/bt PoE PSE equipment, which reduces the reliance on electrical outlets. The GT-805A-PD directly converts the media from the Gigabit fiber to twisted-pair interface.
PAGE 5
GT-805A-PD Specifications Model GT-805A-PD Hardware Specifications Copper Port 10/100/1000BASE-T Ethernet TP RJ45 port (auto-MDI/MDI-X) twisted pair Fiber Port 100/1000BASE-X Fiber Port Type (connector) SFP (LC) Copper Maximum Distance 100m Fiber Maximum Distance Vary by SFP Transceiver System: Power x 1 (Green) LED Indicator TP LINK/ACT, 1000 LINK/ACT (Green).
PAGE 6
GT-805A-PD Dimensions 100/1000X PoE+ PD Media Converter 100/1000X to 10/100/1000T 70.30 LFP ON OFF 10/100/1000T PoE In 100/1000BASE-X to 10/100/1000BASE-T 5V DC LNK/ACT Fiber TP PWR 1000 IEEE 802.3at PoE+ PD Media Converter Power over Ethernet 26.20 94.00 ∅7 .00 4.00 46.70 Unit: mm Ordering Information GT-805A-PD 802.
PAGE 7
GT-805A-PD Accessory RKE-DIN DIN-rail Kit For Media Converter Related 802.3bt Ultra PoE Injector Products POE-176-95 Single-Port 10Gbps 95-watt 802.3bt PoE++ Injector POE-171A-95 Single-Port Multi-Gigabit 802.3bt PoE++ Injector (95 Watts) POE-171A-60 Single-Port Multi-Gigabit 802.3bt PoE++ Injector (60 Watts) POE-175-95 Single-Port 10/100/1000Mbps 802.
PAGE 8
GT-805A-PD Related PoE Media Converter Products FTP-802 100BASE-FX to 10/100BASE-TX PoE Media Converter (SC,MM)-2km FTP-802S15 100BASE-FX to 10/100BASE-TX PoE Media Converter (SC,SM)-15km GTP-80x Series 100/1000BASE-X to 10/100/1000BASE-T PoE+ Media Converter VC-231GP 1-Port 10/100/1000T 802.