GT-80x Series (V6) Datasheet

ManualsBrandsPLANET Technology ManualsMedia Converters10/100/1000Base-T to 1000BASE-LX Media Converter (SM, SC, 60km)

GT-80x Series

10/100/1000BASE-T to 1000BASE-SX/LX Gigabit

Media Converter

• ComplieswithIEEE802.310BASE-T,IEEE802.3u

100BASE-TX,IEEE802.3ab1000BASE-T,IEEE802.3z

1000BASE-SX/LX

• TPportsupports10/100/1000BASE-Tauto-negotiationand

auto-MDI/MDI-X

• 1000BASE-SX:50/125μmor62.5/125μmmulti-modeber

cable,upto220/550m(GT-802)

• 1000BASE-LX:9/125μmsingle-modecableprovidesa

distanceof10km(GT-802S)

• 1000BASE-LX:9/125μmsingle-modecableprovidesa

distanceof40km(GT-802S40)

• 1000BASE-LX:9/125μmsingle-modecableprovidesa

distanceof60km(GT-802S60)

• 1000BASE-SX/LX:50/125μm/62.5/125μmmulti-modeber

cableor9/125μmsingle-modecableprovidesadistance

dependingonSFPmodule(GT-805A)

• 1000BASE-LXWDMinterfaceisforupto15km(single-

modeber9μm/125μm)onGT-806A15/GT-806B15

• 1000BASE-LXWDMinterfaceisforupto40km(single-

modeber9μm/125μm)onGT-806A40/GT-806B40

• 1000BASE-LXWDMinterfaceisforupto60km(single-

modeber9μm/125μm)onGT-806A60/GT-806B60

• 1000BASE-T:2-pairCat.5/5e/6UTPcable,upto100

meters

• Layer2keyfeatures

– IEEE802.3xowcontrolforfullduplexandback

pressureforhalfduplexeliminatethelossofpackets

– SupportsautoMDI/MDI-Xfunction

– Store-and-Forwardmechanism

– Non-blockingfullwire-speedforwardingrate

• Mediaconversionbetween10/100/1000BASE-Tand

1000BASE-SX/LX.

• Fibermediaallows

– Multi-modeberusingSC/LC/WDMconnector

– Single-modeberusingSC/LC/WDMconnector

• CompactsizeforworkingwithPLANETMCfamilymedia

Providingtheflexibilityof10/100/1000MbpsEthernetMediaviaRJ45portand

highlystableGigabitfiberperformance,PLANETGT-802,GT-802S, GT-802S40,

GT-806S60GT-805Aand GT-806A/B mediaconverterssupportconversion

between10/100/1000BASE-T and 1000BASE-SX/LXnetworks.ThereareSC/

SFP/WDMconnectorswithsingle-modeormulti-modemediaasrequired.The

Ethernetsignalallowsthreetypesofsegmentstoconnecteasily,efficientlyand

inexpensively.

DistanceExtensionwithHighPerformanceandSteadyNetwork

Communications

PLANETGT-80xgigabitmediaconverterseriesextendscommunicationdistance

withhighlyGigabitperformanceviafiberopticcable.TheGT-80xseriesprovides

mediaconversionbetween10/100/1000BASE-Tand1000BASE-SX/LXinterfaces

forvariousberopticapplications.Theavailableberinterfacesareshownbelow:

Optic Mode Connector Type Distance

Multi-mode DuplexLC/SC 220m/550m/2km

Singlemode DuplexLC/SC 10/20/40/60/80/120km

SinglemodeWDM SimplexLC/SC 10/15/20/40/60/80km

EnhancedSmartManagementFeatures

TheGT-80xseriesprovidesautoMDI/MDI-XonitsTPportandtheDIPswitchto

configuretheLink Fault Passthroughfunction(LFP).TheLFPfunctionincludes

theLinkLoss Carry Forward (LLCF)/Link Loss Return (LLR).LLCF/LLRcan

immediatelyalarmadministratorstheproblemofthelinkmediaandprovideefcient

solutiontomonitoringthenetwork.TheDIPswitchcandisable orenabletheLFP

function.

■LLCFmeanswhenadeviceconnectedtotheconverterandtheTPlineloses

thelink,theconverter’sberwilldisconnectthelinkoftransmission.

■LLR(LinkLossReturn)meanswhenadeviceconnectedtotheconverter

andtheberlinelosesthelink,theconverter’sberwilldisconnectthelinkof

transmission.

Bothcanimmediatelyalarmadministratorstheproblemofthelinkmediaand

provideefcientsolutiontomonitoringthenetwork.

Summary of content (6 pages)

PAGE 1
GT-80x Series 10/100/1000BASE-T to 1000BASE-SX/LX Gigabit Media Converter • Complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3z 1000BASE-SX/LX • TP port supports 10/100/1000BASE-T auto-negotiation and auto-MDI/MDI-X • 1000BASE-SX: 50/125μm or 62.
PAGE 2
GT-80x Series Remote Link Norma l chassis (MC-700/MC-1500/MC-1500R/MC-1500R48) • Wall-mountable design IP Camera 1000 Fiber Cable Monitoring Center • LED indicators for easy network diagnostics Copper Cable Copper Cable • Provides DIP switch for LFP function (Disable/Enable) LFP Enabled LFP Enabled setting • 9K jumbo frame supported Remote Link • Choice of fiber connectors from SC, LC and WDM; multi- Bro k e n 5 Copper Link Down 1 3 Copper Link Broken IP Camera Fiber Link Down 1000 Monito
PAGE 3
GT-80x Series Applications Fiber-optic Networking for ISPs, Enterprises, and homes With high performance of data transmission and easy installation, the GT-80x can build the ISP network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) for ISPs and FTTBs (Fiber to the Building) for small enterprise network environment.
PAGE 4
GT-80x Series Specifications GT-802S GT-802S40 GT-802S60 GT-802 Product GT-806A15 GT-806B15 GT-805A GT-806A40 GT-806B40 GT-806A60 GT-806B60 Hardware Specifications Hardware Version 6 Copper Port 10/100/1000BASE-T Ethernet TP RJ45 port (auto-MDI/MDI-X) twisted pair Fiber Port 1000BASE-X 100/1000BASE-X 1000BASE-BX SC SFP WDM Fiber Port Type (connector) Copper Maximum Distance 100m GT-802S: 10km Fiber Maximum Distance 220m&550m GT-802S40:40km N/A 15km 40km 60km GT-806A15: GT-806A40
PAGE 5
GT-80x Series Standard Conformance IEEE 802.3, 10BASE-T IEEE 802.3u, 100BASE-TX/100BASE-FX IEEE 802.3ab, 1000BASE-T Standards Compliance IEEE 802.3z, 1000BASE-SX/LX IEEE 802.
PAGE 6
GT-80x Series Available 100Mbps Modules for GT-805A Fast Ethernet Transceiver (100BASE-X SFP) Model MFB-FX MFB-F20 MFB-F40 MFB-F60 MFB-F120 Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (nm) Operating Temp. 100 100 100 100 100 LC LC LC LC LC Multi Mode Single Mode Single Mode Single Mode Single Mode 2km 20km 40km 60km 120km 1310nm 1310nm 1310nm 1310nm 1310nm 0 ~ 60 degrees C 0 ~ 60 degrees C 0 ~ 60 degrees C 0 ~ 60 degrees C 0 ~ 60 degrees C PLANET Technology Corporation 11F.