GT-80x Series User Manual

1-6
8. Cable Connection Parameter
Cables:
Standard (Wavelength) 100Base-FX (1310nm) 1000Base-SX (850nm) 1000Base-LX (1310nm)
Fiber Type & Cable
Specication
Multi-mode 50/125μm or 62.5/125μm
Single-mode 9/125μm
FT-80x:
The wiring details are as below:
Wiring distance:
Duplex Connection Limitation (max.)
Twisted Pair
Half / Full
Node to Node
Node to Switch/Hub
100 meters
Multi-Mode Converters
MM Half
Node to Node
Node to Switch
412 meters
MM Full
Node to Node
Node to Switch
2 kilometers
Single-Mode Converters* (FT-80xynn; x= 2, 6; y= S, A, B; nn=km)
SM Full
Node to Node
Node to Switch
Depends on model
GT-80x:
Wiring Distances:
Standard Fiber Diameter (micron) Bandwidth (MHz x km) Max. Distance (meters)
1000Base-SX MM
62.5
50
100
500
220
550
1000Base-LX
MM
62.5
50
5
5
550
SM 9 N/A 5000*
Note
The Single-mode port (1000Base-LX port) of GT-802S, GT-805A, GT-806A15/B15 and
GT-806A60/B60 is complied with LX 5 kilometers and provides additional margin
allowing for a 10 / 15 / 60 kilometers Gigabit Ethernet link (max. 120km) on single mode
fiber.