GT-80x Series User Manual
1-7
9. Product Specication
FT-80x
Model FT-801 FT-802 FT-802S15 FT-802S35 FT-802S50
FT-806A20
FT-806B20
Fiber Connector ST SC SC SC WDM
Fiber Mode Multi-mode Single-mode
Fiber Maximum Distance 2km 15km 35km 50km 20km
Copper Connector 10/100Mbps RJ-45
Copper Modes Full Duplex, auto-negotiation
Packet Forwarding Rate
(64bytes)
14880pps @10Mbps; 148810pps @100Mbps
DIP switch LFP Disable / Enable; FX Full / Half-duplex
Protocols and Standards
IEEE 802.3, 10Base-T
IEEE 802.3u, 100Base-TX, 100Base-FX
Dimensions 97 x 69 x 26 mm (W x D x H)
Weight 0.2kg
Power 5VDC, 2A max.
Emission FCC, CE
Temperature Operating: 0 ~ 50°C / Storage: -40 ~ 70°C
Humidity 5% ~ 95% non-condensing
Installation Wall mount, DIN-Rail, Chassis Installation
Note
1. Please note FT-806A20/806B20 is designed to work together. It means you must
connect FT-806A20 to FT-806B20 in pair. If both ends are FT-806A20 (or FT-806B20),
or any above model to any 3rd party device, they can’t work normally and may
damage the fiber connectors.
2. The FT-802xxx / FT-806xxx series single mode Media Converter provide long
distance support from 15 km to 50km. When shorter distance of single-mode fiber
cable is used, you might need to insert an in-line optical attenuator in the link to
avoid overloading of the receiver.
3. Connecting to the Fast Ethernet products, please refer to the device’s Technical
Manual.
4. Consult your dealer for DIN-Rail or Chassis installation.