Manualshelf

User's Manual

ManualsBrandsPLANET Technology ManualsGigabit PoE Switch24-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T + 2-Port Gigabit TP/SFP Combo Ethernet Switch
12
- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
1. Package Contents
Thank you for purchasing PLANET 24-Port 10/100/1000T 802.3at PoE +
2-Port 10/100/1000T + 2-Port Gigabit TP/SFP Combo Ethernet Switch,
GSW-2824P. “802.3at PoE+ Switch” mentioned in this Guide refers to
the GSW-2824P.
Open the box of the 802.3at PoE+ Switch and carefully unpack it. The
box should contain the following items:
The 802.3at PoE+ Switch x 1 User’s Manual x 1 Power Cord x 1
SFP Dust Cap
x 2
Screws x 8
Rack-mounting
Brackets x 2
Rubber Feet x 4
If any of these pieces are missing or damaged, please contact your
dealer immediately; if possible, retain the carton including the original
packing material, and use them again to repack the product in case
there is a need to return it to us for repair.
− VLAN mode: Ports 1~24 cannot communicate with each other,
but can communicate with the uplink ports 25~28 and SFP
ports27~28
− Extend mode: Ports 1~8 have data rate of 10Mbps. The
farthest transmis-sion distance is up to 250 meters and all
ports can communicate with each other.
VLAN mode is to isolate ports to prevent broadcast storm and
defendDHCPspoong
Automatic address learning and address aging
Hardware
19-inch rack-mount size, 1U height
LED indicators for system power, per port PoE ready and PoE
activity, speed, Link/Act
2fanstoprovidestableandecient power performance
Supports contact discharge of ±6KV DC and air distance discharge
of±8KVDCforEthernetESDprotection
Supports±6KVsurgeimmunity
3.ProductSpecications
Model GSW-2824P
HardwareSpecications
10/100/1000BASE-T
Copper Ports
28 auto MDI/MDIX
1000BASE-X SFP/
mini-GBIC Slots
2
4.2 LED Indicators
System
LED Color Function
PWR Green Lights to indicate the Switch has power.
Per 10/100/1000BASE-T Port (port 1~28)
LED Color Function
1000
LNK/ACT
Green
Lights to indicate the link through that
port is successfully established.
Blinks to indicate that the Switch is
activelysendingorre-ceivingdataover
that port.
10/100
LNK/ACT
Amber
Lights to indicate the link through that
port is successfully established.
Blinks to indicate that the Switch is
activelysendingorre-ceivingdataover
that port.
PoE in Use
(port1~24)
Amber
Lightstoindicatetheportisproviding
PoE DC in-line power.
Per 1000BASE-X SFP combo Interface (port 27~28)
LED Color Function
1000
LNK/ACT
Green
Lights to indicate the link through that port
is successfully established at 1000Mbps.
BlinkstoindicatethattheSwitchisactively
sendingorreceivingdataoverthatport.
Switch
Throughput@64bytes
41.66Mpps
MAC Address Table 8K entries
Jumbo Frame 9216 bytes
Flow Control
IEEE 802.3x pause frame for full duplex;
back pressure for half duplex
PoweroverEthernet
PoE Standard IEEE802.3atPoweroverEthernetPlus/PSE
PoE Injector Ports 24
PoE Power Supply
Type
End-span:1/2(+),3/6(-)
PoE Power Output
Perport54±1V DC,300mA.max.15.4
watts(IEEE802.3af)
Perport54±1V DC,600mA.max.32watts
(IEEE802.3at)
PoE Power Budget 250 watts
Number of PDs,
7 watts
24
Number of PDs,
15.4 watts
16
Number of PDs,
30 watts
8
Standards Conformance
Regulatory
Compliance
FCC Part 15 Class A, CE
2. Product Features
Physical Port
24-port 10/100/1000BASE-T RJ45 copper with PoE injector func-
tion
4 10/100/1000BASE-T RJ45 copper interfaces
21000BASE-XSFPcombointerfaces,sharedwithPorts27~28
PoweroverEthernet
Complies with IEEE 802.3at Power over Ethernet Plus end-span
PSE
Up to 24 ports of IEEE 802.3af/802.3at devices powered (ports
1~24)
Supports PoE power up to 32 watts for each PoE port, with a total
PoE budget of 250W.
Eachportsupports54VDCpowertoPoEpowereddevice.
Autodetectspowereddevice(PD)
SupportsPDalivefunction.
Circuitprotectionpreventspowerinterferencebetweenports.
Remote power feeding up to 100m in standard mode with 250m in
extend mode
Switching
Hardware-based 10/100/1000Mbps auto-negotiation and auto MDI/
MDI-X
Supports IEEE802.3x ow control in full-duplex mode and back-
pressure in half-duplex mode
Integrates address look-up engine, supporting 8K absolute MAC
addresses
9Kjumboframesupportsallspeeds(10/100/1000Mbps)
Hardware-based DIP switch for Standard, VLAN or Extend mode
selection;
DIP Switch
Selectable operation mode
Standard
VLAN
Extend
Dimensions
(WxDxH)
207.3x441.5x44mm(1Uheight)
Enclosure Metal
Weight 3022g
Power Requirements 100~240VAC,50/60Hz,5Amax.
Power Consumption/
Dissipation
Max. 298 watts/1017 BTU
Thermal Fan 2
ESD Protection
Contactdischargeof±6KVDC,
Airdischargeof±8KVDC
Surge Protection ±6KV
Installation Desktop or rack-mount installation
LED
System
Power(Green)
10/100/1000T RJ45 Interfaces
10/100 LNK/ACT (Amber)
1000LNK/ACT(Green)
PoE-in-Use (Amber)
1000X SFP Interfaces
1000LNK/ACT(Green)
Switching
Switch Architecture Store-and-Forward
Switch Fabric 56Gbps
Standards
Compliance
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab Gigabit 1000BASE-T
IEEE 802.3z Gigabit SX/LX
IEEE802.3xowcontrolandbackpressure
IEEE802.3afPoweroverEthernet
IEEE802.3atPoweroverEthernetPlus
IEEE802.3azEnergyEcientEthernet
Environment
Operating
Temperature:0~50degreesC
RelativeHumidity:5 ~95%
(non-condensing)
Storage
Temperature: -10~70degreesC
RelativeHumidity:5~95%
(non-condensing)
4. Hardware Introduction
4.1 Front Panel
The Front Panel of the 802.3at PoE+ Switch consists of 24-Port
10/100/1000T + 2-Port 10/100/1000T + 2-Port Gigabit TP/SFP Combo
ports. The LED Indicators are also located on the front panel of the
802.3at PoE+ Switch.
GSW-2824P
PWR
1
2
3
4
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
26
25
28
27
27 28
Standard
VLAN
Extend
24-Port 10/100/1000T 802.3at PoE
+
2-Port 10/100/1000T
+
2-Port Gigabit TP/SFP Combo Ethernet Switch
10/100
1000
LNK/ACT
LNK/ACT
PoE-in-Use
1000X SFP
Figure 4-1: GSW-2824P Switch Front Panel
4.3 Multiple Functions of DIP Switch
The front panel of the 802.3at PoE+Switch provides one DIP switch for
Standard, VLAN or Extend mode selection. The detailed descriptions
are shown in the following table.
DIP Switch Mode Function
Standard
VLAN
Extend
This mode makes the 802.3at PoE+ Switch
operate as a general switch and all PoE
ports operate at 10/100/1000Mbps auto-
negotiation. All ports can communicate with
one another.
Standard
VLAN
Extend
This mode makes the 802.3at PoE+ Switch
operate as a VLAN isolation switch and
1. Ports1to24willisolaterespectively.
2. Ports 1 to 24 can only communicate with
ports25~28.
Standard
VLAN
Extend
This mode makes the 802.3at PoE+ Switch
operate as a Long Reach PoE switch and
1. Ports 1 to 8 support farthest transmission
distance of up to 250 meters
2. Ports1to8haveadatarateof10Mbps
3. All ports can communicate with one
anothe.
Note
Please adjust the DIP switch before powering on the
802.3at PoE+ Switch.

Summary of content (2 pages)