Datasheet

GSW-2824P
3
Powered Device Alive Check
The GSW-2824P adopts not only Power over Ethernet technology, but also automated PD monitoring and real-time PoE status.
The PD alive check feature is applied in Standard, VLAN and Extend modes. After the PoE of the port is powered on, the device starts to detect whether the
port is transmitting data. If the port does not transmit data and the duration exceeds a specific time, PoE will automatically power off and then re-power. It
also will greatly enhance the network reliability in that the PoE port will reset the PD power, thus reducing administrator’s management burden.
PoE PD Alive Check
Restart PoE Device
Step 3
Checking alive status for 3 times
Step 2
No Response!
Ping Request
PoE Device Status Good!!
Step 1
Ping Request
Ping Echo
Flexible Extension Solution
The two SFP ports built in the GSW-2824P are compatible with the 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver, uplinked to
backbone switch and monitoring center in long distance. The distance can be extended from 550 meters (multi-mode fiber) to 10/20/30/40/50/60/70/120
kilometers(single-modeberorWDMber).Theyarewellsuitedforapplicationswithintheenterprisedatacentersanddistributions.
Applications
Perfectly Integrated Solution for IP PoE Camera and NVR System
Particularly designed for the growing popular IP Surveillance applications, the GSW-2824P 802.3at PoE Switch is positioned as a Surveillance Switch
for quick and easy PoE IP camera deployment with power feeding. The GSW-2824P provides both 802.3at and 802.3af PoE functions along with 24
10/100/1000BASE-TX ports featuring 32-watt 802.3at PoE in RJ45 interface, 2 extra Gigabit copper ports and 2 Gigabit SFP combo interfaces supporting
high-speed transmission of surveillance images and videos.
Gigabit Uplink
24 PoE IP Cameras
PoE PoE PoE PoE PoE PoE PoE PoE
Monitoring Center
GSW-2824P
PoE
1000BASE-T UTP with PoE
1000BASE-SX/LX Fiber Optic
1000
1000BASE-T UTP
NVR
1000