User Manual

16
Step6: Proceed with Steps 4 and 5 of session 3.1 Desktop Installation to connect
the network cabling and supply power to your Switch.
3.3 Installing the SFP Transceiver (GSW-2620HP only)
The sections describe how to insert an SFP transceiver into an SFP slot of the
GSW-2620HP.
The SFP transceivers are hot-pluggable and hot-swappable. You can plug in and
out the transceiver to/from any SFP port without having to power down the GSW-
2620HP, as the Figure 3-4 shows.
MGB-SX/LX
LC Fiber Cable
1
2
Figure 3-4: Plug In the SFP Transceiver
 Approved PLANET SFP Transceivers
PLANET GSW-2620HP supports both single mode and multi-mode SFP transceiver.
The following list of approved PLANET SFP transceivers is correct at the time of
publication:
Gigabit SFP Transceiver Modules

MGB-GT SFP-Port 1000BASE-T Module
 MGB-SX SFP-Port 1000BASE-SX mini-GBIC module
 MGB-LX SFP-Port 1000BASE-LX mini-GBIC module - 10km
 MGB-L30 SFP-Port 1000BASE-LX mini-GBIC module - 30km
 MGB-L50 SFP-Port 1000BASE-LX mini-GBIC module - 50km
 MGB-L70 SFP-Port 1000BASE-LX mini-GBIC module - 70km
 MGB-L120 SFP-Port 1000BASE-LX mini-GBIC module - 120km