24-Port Web Smart Gigabit Ethernet Switch User's Manual

The RADIUS Server configuration table includes the following fields: Table 4-22 Description of the 802.1X Configuration.

• Item

Description

• Mode

To Enable/Disable the port access control administrative mode

This selector lists the two options for administrative mode: enable and disable.

The default value is disabled..

• RADIUS Server IP

The IP address of the RADIUS server being added.

• RADIUS UDP Port

The UDP port used by this server. The valid range is 0 - 65535.

The default UDP Port No. is 1812

• RADIUS Secret

Indicates if the shared secret for this server has been configured.

Table 4-22 Description of the 802.1X Configuration

Setup the RADIUS server and assign the client IP address to the Web-Smart switch. In this case, field in the default IP

Address of the Web-Smart switch with 192.168.0.100. And also make sure the shared secret key is as same as the one

you had set at the switch RADIUS server – 12345678 at this case.

Figure 4-44 RADIUS Server configuration

-55-