Datasheet

GSW-1601
2
The GSW-1601 operates as a normal Gigabit Ethernet Switch in the "Standard" operation mode. The "VLAN" operation mode features port-based VLAN
function that can help to prevent the connected clients’ multicast or broadcast storm from inuencing each other.
1000BASE-T UTP
VLAN Isolation Mode
PC
PC
PC
PC
Ports 1 to 14
Access Denied
Ports 15 and 16
Ports 1~14 Access Permitted
GSW-1601
Standard
Flow Control Off
Extend
VLAN
In the "Extend" operation mode, the GSW-1601 operates on a per-port basis at 10Mbps duplex operation but can transmit data over a distance of up to 200
meters overcoming the 100m limit on Ethernet UTP cable. With this brand-new feature, the GSW-1601 provides an additional solution for distance extension,
thus saving the cost of Ethernet cable installation. Its VLAN isolation function isolates each port so as to prevent broadcast storm and defend DHCP spoong in
the “Extend” operation mode.
1000BASE-T UTP
Standard Mode (default)
Power
100 meters (328 feet)
PC
GSW-1601
Standard
Flow Control Off
Extend
VLAN
1000BASE-T UTP
Extend Mode
Power
200 meters (656 feet)
PC
GSW-1601
Standard
Flow Control Off
Extend
VLAN
High Performance
The GSW-1601 provides a high-performance switch architecture that is capable of providing the non-blocking switch fabric and wire-speed throughput as high as
32Gbps, which greatly simplies the tasks of upgrading the LAN for catering to increasing bandwidth demands. Besides, the Flow Control function of the GSW-
1601 enables routers and servers to directly connect to the Switch for fast and reliable data transfer.
All the RJ45 copper interfaces of the GSW-1601 support 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ45 Category 6, 5 or
5e cables. It also supports standard for auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or
crossover cables.