Datasheet

Data Sheet
1
GSW-1601
1
16-Port 10/100/1000BASE-T Gigabit Ethernet Switch
Cost-e󰀨ective Gigabit Solution for Enterprise Backbone and Data Center
Networking
PLANET GSW-1601 Gigabit Ethernet Switch provides 16 RJ45 10/100/1000Mbps
ports for high-speed network connectivity. It can automatically identify and determine
the correct transmission speed and half/full duplex mode of the attached devices with
its 16 Gigabit ports that support 9K jumbo frame feature. Therefore, the GSW-1601
can handle extremely large amounts of data transmission in a secure topology linking
to a backbone or high-power servers.
Physical Port
16 10/100/1000BASE-T Gigabit Ethernet ports
Supports auto MDI/MDI-X function
Layer 2 Features
Complies with IEEE 802.3, 10BASE-T, IEEE 802.3u
100BASE-TX, IEEE 802.3ab 1000BASE-T Ethernet
standards
Features Store-and-Forward mode with wire-speed
ltering and forwarding rates
Integrated address look-up engine, supporting 8K
absolute MAC addresses
9K jumbo packet support
Power saving ability for Green networking
IEEE 802.1Q VLAN packet transparency support
IEEE 802.3x ow control for full duplex operation and
back pressure for half duplex operation
Hardware-based 10/100BASE-TX, half/full duplex and
1000BASE-T full duplex mode, ow control and auto-
negotiation
Automatic address learning and address aging
Supports CSMA/CD protocol
Hardware Features
100~240V AC, 0.16A, 50~60Hz universal power input
DIP switch for standard/ow control o󰀨/VLAN/Extend
mode selection
FCC, CE class A compliant
16 x 10/100/1000BASE-T PortsSpeed, LNK/ACT Status
Power LED
Standard/Flow Control Off/
VLAN/Extend Mode DIP Switch
Brand-new Hardware DIP Switch for Functional Operation Modes Selection
The new hardware version of the GSW-1601 o󰀨ers “Standard”, “Flow Control O󰀨”,
“VLAN” and “Extend” modes.
DIP Switch Mode Function
Standard
(default)
This mode makes the Gigabit Ethernet Switch operate as a general switch and
all ports operate at 10/100/1000Mbps auto-negotiation.
Flow Control O󰀨 This mode disables the Gigabit Ethernet Switch ow control function.
VLAN
This mode makes the GSW-1601 operate as a VLAN isolation switch and
1. Port 1 to port 14 will isolate respectively.
2. Port 1 to port 14 can only communicate with port 15 and port 16 (uplink port).
Extend
This mode makes the GSW-1601 operate as a distance extension switch and
port 1 to port 8 can only transmit distance of 200m at speed of 10Mbps.

Summary of content (6 pages)