(V4) Datasheet

GSD-908HP
2
Innovative Port-based VLAN Isolated Feature
The GSD-908HP features “VLAN” function whose ports can be isolated from each other via one DIP switch. This can help to prevent the IP camera’s
multicast or broadcast storm from inuencing each other.
PoE
1 2 3 4
5
ACTLNK
PoE In-use
FSD-604HP
Standard
Extend
PoE
1 2 3 4
5 Uplink 6
ACTLNK
PoE In-use
FSD-604HP
PWR
Standard
Extend
1 2 3 4 5 6 7 8 9-
GSD-908HP
PWR
Uplink
PoE-in-Use ACTLNK
Default
VLAN
1 2 3 4 5 6 7 8 9-
GSD-908HP
PWR
Uplink
PoE-in-Use ACTLNK
Default
VLAN
Port Isolation
Port-based VLAN
Stable and High Performance Switch Architecture
The GSD-908HP has a 2K MAC address table and provides the 18Gbps switch fabric and throughput as high as 13.3Mpps, which greatly simplies the tasks
of upgrading the LAN for catering to increasing bandwidth demands. Besides, the 802.3x full-duplex flow control function of the GSD-908HP enables PD
devices and servers to be directly connected to the switch for packet transfer performance without the risk of packet loss.
Easy Cable Connection
With data and power over Ethernet from one unit, the GSD-908HP reduces cabling requirements and eliminates the need for dedicated electrical outlets
on the wall, ceiling or any unreachable place. A wire that carries both data and power can lower the installation costs, simplify the installation effort and
eliminate the need for electricians or extension cords. Providing eight 802.3af/802.3at PoE+ interfaces, the GSD-908HP is ideal for small businesses and
workgroups requiring the PoE deployment of wireless access points, IP-based surveillance cameras or IP phones in any places with ease, efficiency and
cost-effectiveness.