User's Manual

2. Hardware Description

These switches provide three dierent running speeds – 10Mbps, 100Mbps and

1000Mbps, and automatically distinguish the speed of the incoming connection.

This section describes the hardware features of the GSD-804P. For easier

management and control of the GSD-804P, familiarize yourself with its display

indicators and ports. Front panel illustrations in this chapter display the unit LED

indicators. Before connecting any network device to the GSD-804P, please read this

chapter carefully.

2.1 Front Panel

The Front Panel of the GSD-804P PoE+ Ethernet Switch consists of 8x Auto-

Sensing 10/100/1000Mbps Ethernet RJ45 Ports. The LED Indicators are also

located on the front panel of the GSD-804P.

GSD-804P

8-Port 10/100/1000T Gigabit Ethernet Switch with

4-Port

802.3at PoE+ Injector

2 6

4 8

PoE

1 53 7

PoE

MAX

PWR

Extend

Standard

ACT1000

ACT10/100

LNK

PoE-in-Use

DIPON

1 2 3 4

Figure 2-1: GSD-804P Switch Front Panel

The front panel of GSD-804P provides one DIP switch for “Standard” and

“Extend” mode selections. The detailed descriptions are shown in the following

table.

DIP Switch Mode Function

Standard

(default)

Numbers 1 to 4 correspond to PoE Port-1 to Port-4.

This mode makes the GSD-804P operate as a general

switch and all PoE ports operate at 10/100/1000Mbps auto-

negotiation.

Extend

This mode makes the PoE ports of the GSD-804P operate

at auto–negotiation 10Mbps speed duplex mode only, but

the delivery distance of PoE power and network data can

reach 250m.