User's Manual

Note

Cable Distance for Switch

The cable distance between the GSD-804P and PC should not

exceed 100 meters for UTP/STP cable.

Make sure the wiring is correct

Category 3/4/5 cable can be used in 10Mbps operation. To reli-

ably operate your network at 100Mbps or 1000Mbps, you must use

an Unshielded Twisted-Pair (UTP) Category 5/5e/6 cable, or better

Data Grade cabling. While Category 3 or 4 cables may initially

seem to work, it will soon cause data loss.

3.4.2 Department/Workgroup PoE+ Switch

With 4 PoE+ in-line power interfaces, the GSD-804P can easily build a power that

can be centrally controlled by IP phone system, IP camera system and wireless AP

group for the enterprise. For instance, up to 4 cameras can be installed around the

corner in the company for surveillance demands or up to 4 wireless APs can be

utilized to build a wireless roaming environment in the oce. Without the power-

socket limitation, the Switch makes the installation of cameras or wireless AP

easier and more ecient.

GSD-804P

Power Line (AC)

1000BASE-T UTP

PoE

1000BASE-T UTP with PoE

2.4GHz 802.11n

802.3at PoE

IP Camera

802.3af PoE

VoIP ATA

802.3af PoE VoIP Phone

LAN / PCs

10/100/1000BASE-T Data

Data

Power

Data+Power

802.3at PoE Wireless AP

PoE

Figure 3-5: Department/Workgroup PoE/PoE+ Switch Connection