User's Manual

Step 6: Proceed with Steps 4 and 5 of session 3.1 Desktop Installation to

connect the network cabling and supply power to your Switch.

3.3 Wall Mounting Installation

Step 1: Please nd the wall that can mount the GSD-804P.

Step 2: Install two screws on the wall.

Step 3: Hang the GSD-804P on the screws from the wall.

Step 4: Repeat step 5 of Desktop Installation for power supply to the GSD-

804P.

Note

Before mounting the device to the wall, please check the location

of the electrical outlet and the length of the Ethernet cable.

150mm

RJ45

UTP Cable

100-240V AC

50/60Hz, 1.5A