User's Manual

14
3.2 Rack Mounting
To install the GSD-804P in a 19-inch standard rack, follow the instructions
described below.
Step 1: Place your GSD-804P on a hard at surface, with the front panel
positioned towards your front side.
Step 2: Attach a rack-mount bracket to each side of the GSD-804P with supplied
screws attached to the package. Figure 3-2 shows how to attach brackets
to one side of the GSD-804P.
GSD -804P
8-Port 10/100/1000Mbps with 4-Port 802.3at PoE+
Ethernet Switch
2 6
4 8
PoE
1 5
3 7
PoE
PoE
MAX
PWR
Extended
Standard
2
1
4
3
6
5
8
7
ACT1000
ACT10/100
LNK
LNK
PoE In-Use
1 2 3 4
ON
Figure 3-2: Attaching the Brackets to the GSD-804P
You must use the screws supplied with the mounting brackets.
Damage caused to the parts by using incorrect screws would invali-
date the warranty.
Step 3: Secure the brackets tightly.
Step 4: Follow the same steps to attach the second bracket to the opposite side.
Step 5: After the brackets are attached to the GSD-804P, use suitable screws to
securely attach the brackets to the rack, as shown in Figure 3-3.
GSD- 804P
8-Port 10/100/1000Mbps with 4-Port 802.3at PoE+
Ethernet Switch
2 6
4 8
PoE
1 5
3 7
PoE
PoE
MAX
PWR
Extended
Standard
2
1
4
3
6
5
8
7
ACT1000
ACT10/100
LNK
LNK
PoE In-Use
1 2 3 4
ON
Figure 3-3: Mounting the GSD-804P in a Rack